“To follow the path, look to the master, follow the master, walk with the master, see through the master, become the master.” – Zen Proverb

Zenbot

Current Status (UPDATE MAY 13th '18)

Hey guys!

It's been so long. I'm back, and I have a brand new bot in development. It's code-named Bot18, and it's kicking ass so far.

I wrote a big Medium post detailing what's going on. I'm so excited to explore a brand new engine and the new strategies it makes possible.

I will be developing solely on Bot18 going forward and probably open-sourcing it soon once it stabilizes. Zenbot can live on, but I won't be updating it anymore. It's in the good hands of @DeviaVir who is the best maintainer I could ask for 👍)

Medium post: https://medium.com/@carlos8f_11468/introducing-bot18-the-new-crypto-trading-bot-to-supersede-zenbot-and-unleash-the-zalgo-da8464b41e53

Issue: DeviaVir#1589

~Carlos

Questions

Please ask (programming) questions related to zenbot on stackoverflow. The tag is zenbot.

Description

Zenbot is a command-line cryptocurrency trading bot using Node.js and MongoDB. It features:

Fully-automated technical-analysis-based trading approach
Full support for GDAX, Poloniex, Kraken, Bittrex, Quadriga, Gemini, Bitfinex, CEX.IO and Bitstamp, work on further exchange support is ongoing.
Plugin architecture for implementing exchange support, or writing new strategies
Simulator for Backtesting strategies against historical data
"Paper" trading mode, operates on a simulated balance while watching the live market
Configurable sell stops, buy stops, and (trailing) profit stops
Flexible sampling period and trade frequency - averages 1-2 trades/day with 1h period, 15-50/day with 5m period

Community

Join the Zenbot community on Reddit!

Disclaimer

Zenbot is NOT a sure-fire profit machine. Use it AT YOUR OWN RISK.
Crypto-currency is still an experiment, and therefore so is Zenbot. Meaning, both may fail at any time.
Running a bot, and trading in general requires careful study of the risks and parameters involved. A wrong setting can cause you a major loss.
Never leave the bot un-monitored for long periods of time. Zenbot doesn't know when to stop, so be prepared to stop it if too much loss occurs.
Often times the default trade parameters will underperform vs. a buy-hold strategy, so run some simulations and find the optimal parameters for your chosen exchange/pair before going "all-in".

Quick-start

Step 1) Requirements

Windows / Linux / macOS 10 (or Docker)
Node.js (version 8.3.0 or higher) and MongoDB.

Step 2) Install zenbot 4

Run in your console,

git clone https://github.com/deviavir/zenbot.git

Or, without git,

wget https://github.com/deviavir/zenbot/archive/master.tar.gz
tar -xf zenbot-master.tar.gz
mv zenbot-master zenbot

Create your configuration file by copying conf-sample.js to conf.js:

cp conf-sample.js conf.js

View and edit conf.js.
It's possible to use zenbot in "paper trading" mode without making any changes.
You must add your exchange API keys to enable real trading however.
API keys do NOT need deposit/withdrawal permissions.

If using Docker, skip to section "Docker" below.

Install dependencies:

cd zenbot
npm install
# optional, installs the `zenbot.sh` binary in /usr/local/bin:
npm link

Ubuntu 16.04 Step-By-Step

Video Blog Post

sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get install build-essential mongodb -y

curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get install -y nodejs

git clone https://github.com/deviavir/zenbot.git
cd zenbot
npm install

./zenbot.sh trade --paper

Please note; npm link will not work as forex.analytics is built from source.

Docker (Optional)

To run Zenbot under Docker, install Docker, Docker Compose, Docker Machine (if necessary) You can follow instructions at https://docs.docker.com/compose/install/

After installing (step 2 above),

cd zenbot
docker-compose up (-d if you don't want to see the log)

If you are running windows use the following command

docker-compose --file=docker-compose-windows.yml up

If you wish to run commands (e.g. backfills, list-selectors), you can run this separate command after a successful docker-compose up -d:

docker-compose exec server zenbot list-selectors
docker-compose exec server zenbot backfill <selector> --days <days>

Updating docker

In case you are behind on updates, you can run:

docker pull deviavir/zenbot:unstable

And re-run docker-compose up -d to start the new image.

deviavir/zenbot is automatically updated after every merge. You can follow the tags/builds here: https://hub.docker.com/r/deviavir/zenbot/builds/

Selectors

A "selector" is a short identifier that tells Zenbot which exchange and currency pair to act on. Use the form {exchange_slug}.{asset}-{currency}. A complete list of selectors your Zenbot install supports can be found with:

zenbot list-selectors

gdax:
  gdax.BTC-EUR   (BTC/EUR)
  gdax.BTC-GBP   (BTC/GBP)
  gdax.BTC-USD   (BTC/USD)
  gdax.ETH-BTC   (ETH/BTC)
  gdax.ETH-USD   (ETH/USD)
  gdax.LTC-BTC   (LTC/BTC)
  gdax.LTC-USD   (LTC/USD)

poloniex:
  poloniex.AMP-BTC   (Synereo AMP/BTC)
  poloniex.ARDR-BTC   (Ardor/BTC)
  poloniex.BCN-BTC   (Bytecoin/BTC)
  poloniex.BCN-XMR   (Bytecoin/XMR)
  poloniex.BCY-BTC   (BitCrystals/BTC)

...etc

Run a simulation for your selector

To backfill data (provided that your chosen exchange supports it), use:

zenbot backfill <selector> --days <days>

You can also select start and end date:

zenbot backfill <selector> --start="YYYYMMDDhhmm" --end="YYYYMMDDhhmm"

Note you can use them separately.

After you've backfilled, you can run a simulation:

zenbot sim <selector> [options]

For a list of options for the sim command, use:

zenbot sim --help

For additional options related to the strategy, use:

zenbot list-strategies

By default the sim will start with 1000 units of currency. Override with --currency_capital and --asset_capital.
Open sim_result.html in your browser to see a candlestick graph with trades.

Screenshot and example result

Zenbot outputs an HTML graph of each simulation result. In the screenshot below, the pink arrows represent the bot buying (up arrow) and selling (down arrow) as it iterated the historical data of GDAX exchange's BTC/USD product.

end balance 2954.50 (195.45%)
buy hold 1834.44 (83.44%)
vs. buy hold 61.06%
110 trades over 91 days (avg 1.21 trades/day)

Zenbot started with $1,000 USD and ended with $2,954.50 after 90 days, making 195% ROI! In spite of a buy/hold strategy returning a respectable 83.44%, Zenbot has considerable potential for beating buy/holders.

Note that this example used tweaked settings to achieve optimal return: --profit_stop_enable_pct=10, --profit_stop_pct=4, --trend_ema=36, and --sell_rate=-0.006. Default parameters yielded around 65% ROI.
Raw data from simulation

Running zenbot

The following command will launch the bot, and if you haven't touched c.selector in conf.js, will trade the default BTC/USD pair on GDAX.

zenbot trade [--paper] [--manual]

Use the --paper flag to only perform simulated trades while watching the market.

Use the --manual flag to watch the price and account balance, but do not perform trades automatically.

Here's how to run a different selector (example: ETH-BTC on Poloniex):

zenbot trade poloniex.eth-btc

For a full list of options for the trade command, use:

zenbot trade --help

  Usage: trade [options] [selector]

  run trading bot against live market data

  Options:

    --conf <path>                     path to optional conf overrides file
    --strategy <name>                 strategy to use
    --order_type <type>               order type to use (maker/taker)
    --paper                           use paper trading mode (no real trades will take place)
    --manual                          watch price and account balance, but do not perform trades automatically
    --non_interactive                 disable keyboard inputs to the bot
    --currency_capital <amount>       for paper trading, amount of start capital in currency
    --asset_capital <amount>          for paper trading, amount of start capital in asset
    --avg_slippage_pct <pct>          avg. amount of slippage to apply to paper trades
    --buy_pct <pct>                   buy with this % of currency balance
    --deposit <amt>                   absolute initial capital (in currency) at the bots disposal (previously --buy_max_amt)
    --sell_pct <pct>                  sell with this % of asset balance
    --markdown_buy_pct <pct>          % to mark down buy price
    --markup_sell_pct <pct>           % to mark up sell price
    --order_adjust_time <ms>          adjust bid/ask on this interval to keep orders competitive
    --order_poll_time <ms>            poll order status on this interval
    --sell_stop_pct <pct>             sell if price drops below this % of bought price
    --buy_stop_pct <pct>              buy if price surges above this % of sold price
    --profit_stop_enable_pct <pct>    enable trailing sell stop when reaching this % profit
    --profit_stop_pct <pct>           maintain a trailing stop this % below the high-water mark of profit
    --max_sell_loss_pct <pct>         avoid selling at a loss pct under this float
    --max_buy_loss_pct <pct>          avoid buying at a loss pct over this float
    --max_slippage_pct <pct>          avoid selling at a slippage pct above this float
    --rsi_periods <periods>           number of periods to calculate RSI at
    --poll_trades <ms>                poll new trades at this interval in ms
    --currency_increment <amount>     Currency increment, if different than the asset increment
    --keep_lookback_periods <amount>  Keep this many lookback periods max.
    --exact_buy_orders                instead of only adjusting maker buy when the price goes up, adjust it if price has changed at all
    --exact_sell_orders               instead of only adjusting maker sell when the price goes down, adjust it if price has changed at all
    --use_prev_trades                 load and use previous trades for stop-order triggers and loss protection
    --min_prev_trades                 minimum number of previous trades to load if use_prev_trades is enabled, set to 0 to disable and use trade time instead
    --disable_stats                   disable printing order stats
    --reset_profit                    start new profit calculation from 0
    --use_fee_asset                   Using separated asset to pay for fees. Such as binance's BNB or Huobi's HT
    --run_for <minutes>               Execute for a period of minutes then exit with status 0 (default: null)
    --debug                           output detailed debug info
    -h, --help                        output usage information

and also:

zenbot list-strategies

bollinger
  description:
    Buy when (Signal ≤ Lower Bollinger Band) and sell when (Signal ≥ Upper Bollinger Band).
  options:
    --period=<value>  period length, same as --period_length (default: 1h)
    --period_length=<value>  period length, same as --period (default: 1h)
    --min_periods=<value>  min. number of history periods (default: 52)
    --bollinger_size=<value>  period size (default: 20)
    --bollinger_time=<value>  times of standard deviation between the upper band and the moving averages (default: 2)
    --bollinger_upper_bound_pct=<value>  pct the current price should be near the bollinger upper bound before we sell (default: 0)
    --bollinger_lower_bound_pct=<value>  pct the current price should be near the bollinger lower bound before we buy (default: 0)

cci_srsi
  description:
    Stochastic CCI Strategy
  options:
    --period=<value>  period length, same as --period_length (default: 20m)
    --period_length=<value>  period length, same as --period (default: 20m)
    --min_periods=<value>  min. number of history periods (default: 30)
    --ema_acc=<value>  sideways threshold (0.2-0.4) (default: 0.03)
    --cci_periods=<value>  number of RSI periods (default: 14)
    --rsi_periods=<value>  number of RSI periods (default: 14)
    --srsi_periods=<value>  number of RSI periods (default: 9)
    --srsi_k=<value>  %K line (default: 5)
    --srsi_d=<value>  %D line (default: 3)
    --oversold_rsi=<value>  buy when RSI reaches or drops below this value (default: 18)
    --overbought_rsi=<value>  sell when RSI reaches or goes above this value (default: 85)
    --oversold_cci=<value>  buy when CCI reaches or drops below this value (default: -90)
    --overbought_cci=<value>  sell when CCI reaches or goes above this value (default: 140)
    --constant=<value>  constant (default: 0.015)
If you have questions about this strategy, contact me... @talvasconcelos

crossover_vwap
  description:
    Estimate trends by comparing "Volume Weighted Average Price" to the "Exponential Moving Average".
  options:
    --period=<value>  period length, same as --period_length (default: 120m)
    --period_length=<value>  period length, same as --period (default: 120m)
    --emalen1=<value>  Length of EMA 1 (default: 30)
    --smalen1=<value>  Length of SMA 1 (default: 108)
    --smalen2=<value>  Length of SMA 2 (default: 60)
    --vwap_length=<value>  Min periods for vwap to start (default: 10)
    --vwap_max=<value>  Max history for vwap. Increasing this makes it more sensitive to short-term changes (default: 8000)

dema
  description:
    Buy when (short ema > long ema) and sell when (short ema < long ema).
  options:
    --period=<value>  period length (default: 1h)
    --min_periods=<value>  min. number of history periods (default: 21)
    --ema_short_period=<value>  number of periods for the shorter EMA (default: 10)
    --ema_long_period=<value>  number of periods for the longer EMA (default: 21)
    --up_trend_threshold=<value>  threshold to trigger a buy signal (default: 0)
    --down_trend_threshold=<value>  threshold to trigger a sold signal (default: 0)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 9)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 80)
    --noise_level_pct=<value>  do not trade when short ema is with this % of last short ema, 0 disables this feature (default: 0)

forex_analytics
  description:
    Apply the trained forex analytics model.
  options:
    --modelfile=<value>  modelfile (generated by running `train`), should be in models/ (default: none)
    --period=<value>  period length of a candlestick (default: 30m), same as --period_length (default: 30m)
    --period_length=<value>  period length of a candlestick (default: 30m), same as --period (default: 30m)
    --min_periods=<value>  min. number of history periods (default: 100)

macd
  description:
    Buy when (MACD - Signal > 0) and sell when (MACD - Signal < 0).
  options:
    --period=<value>  period length, same as --period_length (default: 1h)
    --period_length=<value>  period length, same as --period (default: 1h)
    --min_periods=<value>  min. number of history periods (default: 52)
    --ema_short_period=<value>  number of periods for the shorter EMA (default: 12)
    --ema_long_period=<value>  number of periods for the longer EMA (default: 26)
    --signal_period=<value>  number of periods for the signal EMA (default: 9)
    --up_trend_threshold=<value>  threshold to trigger a buy signal (default: 0)
    --down_trend_threshold=<value>  threshold to trigger a sold signal (default: 0)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 25)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 70)

momentum
  description:
    MOM = Close(Period) - Close(Length)
  options:
    --momentum_size=<value>  number of periods to look back for momentum (default: 5)

neural
  description:
    Use neural learning to predict future price. Buy = mean(last 3 real prices) < mean(current & last prediction)
  options:
    --period=<value>  period length - make sure to lower your poll trades time to lower than this value. Same as --period_length (default: 1m)
    --period_length=<value>  period length - make sure to lower your poll trades time to lower than this value. Same as --period (default: 1m)
    --activation_1_type=<value>  Neuron Activation Type: sigmoid, tanh, relu (default: sigmoid)
    --neurons_1=<value>  Neurons in layer 1 Shoot for atleast 100 (default: 1)
    --depth=<value>  Rows of data to predict ahead for matches/learning (default: 1)
    --selector=<value>  Selector (default: Gdax.BTC-USD)
    --min_periods=<value>  Periods to calculate learn from (default: 1000)
    --min_predict=<value>  Periods to predict next number from (default: 1)
    --momentum=<value>  momentum of prediction (default: 0.9)
    --decay=<value>  decay of prediction, use teeny tiny increments (default: 0.1)
    --threads=<value>  Number of processing threads you'd like to run (best for sim) (default: 1)
    --learns=<value>  Number of times to 'learn' the neural network with past data (default: 2)

noop
  description:
    Just do nothing. Can be used to e.g. generate candlesticks for training the genetic forex strategy.
  options:
    --period=<value>  period length, same as --period_length (default: 30m)
    --period_length=<value>  period length, same as --period (default: 30m)

rsi
  description:
    Attempts to buy low and sell high by tracking RSI high-water readings.
  options:
    --period=<value>  period length, same as --period_length (default: 2m)
    --period_length=<value>  period length, same as --period (default: 2m)
    --min_periods=<value>  min. number of history periods (default: 52)
    --rsi_periods=<value>  number of RSI periods
    --oversold_rsi=<value>  buy when RSI reaches or drops below this value (default: 30)
    --overbought_rsi=<value>  sell when RSI reaches or goes above this value (default: 82)
    --rsi_recover=<value>  allow RSI to recover this many points before buying (default: 3)
    --rsi_drop=<value>  allow RSI to fall this many points before selling (default: 0)
    --rsi_divisor=<value>  sell when RSI reaches high-water reading divided by this value (default: 2)

sar
  description:
    Parabolic SAR
  options:
    --period=<value>  period length, same as --period_length (default: 2m)
    --period_length=<value>  period length, same as --period (default: 2m)
    --min_periods=<value>  min. number of history periods (default: 52)
    --sar_af=<value>  acceleration factor for parabolic SAR (default: 0.015)
    --sar_max_af=<value>  max acceleration factor for parabolic SAR (default: 0.3)

speed
  description:
    Trade when % change from last two 1m periods is higher than average.
  options:
    --period=<value>  period length, same as --period_length (default: 1m)
    --period_length=<value>  period length, same as --period (default: 1m)
    --min_periods=<value>  min. number of history periods (default: 3000)
    --baseline_periods=<value>  lookback periods for volatility baseline (default: 3000)
    --trigger_factor=<value>  multiply with volatility baseline EMA to get trigger value (default: 1.6)

srsi_macd
  description:
    Stochastic MACD Strategy
  options:
    --period=<value>  period length, same as --period_length (default: 30m)
    --period_length=<value>  period length, same as --period (default: 30m)
    --min_periods=<value>  min. number of history periods (default: 200)
    --rsi_periods=<value>  number of RSI periods
    --srsi_periods=<value>  number of RSI periods (default: 9)
    --srsi_k=<value>  %D line (default: 5)
    --srsi_d=<value>  %D line (default: 3)
    --oversold_rsi=<value>  buy when RSI reaches or drops below this value (default: 20)
    --overbought_rsi=<value>  sell when RSI reaches or goes above this value (default: 80)
    --ema_short_period=<value>  number of periods for the shorter EMA (default: 24)
    --ema_long_period=<value>  number of periods for the longer EMA (default: 200)
    --signal_period=<value>  number of periods for the signal EMA (default: 9)
    --up_trend_threshold=<value>  threshold to trigger a buy signal (default: 0)
    --down_trend_threshold=<value>  threshold to trigger a sold signal (default: 0)

stddev
  description:
    Buy when standard deviation and mean increase, sell on mean decrease.
  options:
    --period=<value>  period length, set poll trades to 100ms, poll order 1000ms. Same as --period_length (default: 100ms)
    --period_length=<value>  period length, set poll trades to 100ms, poll order 1000ms. Same as --period (default: 100ms)
    --trendtrades_1=<value>  Trades for array 1 to be subtracted stddev and mean from (default: 5)
    --trendtrades_2=<value>  Trades for array 2 to be calculated stddev and mean from (default: 53)
    --min_periods=<value>  min_periods (default: 1250)

ta_ema
  description:
    Buy when (EMA - last(EMA) > 0) and sell when (EMA - last(EMA) < 0). Optional buy on low RSI.
  options:
    --period=<value>  period length, same as --period_length (default: 10m)
    --period_length=<value>  period length, same as --period (default: 10m)
    --min_periods=<value>  min. number of history periods (default: 52)
    --trend_ema=<value>  number of periods for trend EMA (default: 20)
    --neutral_rate=<value>  avoid trades if abs(trend_ema) under this float (0 to disable, "auto" for a variable filter) (default: 0.06)
    --oversold_rsi_periods=<value>  number of periods for oversold RSI (default: 20)
    --oversold_rsi=<value>  buy when RSI reaches this value (default: 30)

ta_macd
  description:
    Buy when (MACD - Signal > 0) and sell when (MACD - Signal < 0).
  options:
    --period=<value>  period length, same as --period_length (default: 1h)
    --period_length=<value>  period length, same as --period (default: 1h)
    --min_periods=<value>  min. number of history periods (default: 52)
    --ema_short_period=<value>  number of periods for the shorter EMA (default: 12)
    --ema_long_period=<value>  number of periods for the longer EMA (default: 26)
    --signal_period=<value>  number of periods for the signal EMA (default: 9)
    --up_trend_threshold=<value>  threshold to trigger a buy signal (default: 0)
    --down_trend_threshold=<value>  threshold to trigger a sold signal (default: 0)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 25)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 70)

ta_macd_ext
  description:
    Buy when (MACD - Signal > 0) and sell when (MACD - Signal < 0) with controllable talib TA types
  options:
    --period=<value>  period length, same as --period_length (default: 1h)
    --min_periods=<value>  min. number of history periods (default: 52)
    --ema_short_period=<value>  number of periods for the shorter EMA (default: 12)
    --ema_long_period=<value>  number of periods for the longer EMA (default: 26)
    --signal_period=<value>  number of periods for the signal EMA (default: 9)
    --fast_ma_type=<value>  fast_ma_type of talib: SMA, EMA, WMA, DEMA, TEMA, TRIMA, KAMA, MAMA, T3 (default: null)
    --slow_ma_type=<value>  slow_ma_type of talib: SMA, EMA, WMA, DEMA, TEMA, TRIMA, KAMA, MAMA, T3 (default: null)
    --signal_ma_type=<value>  signal_ma_type of talib: SMA, EMA, WMA, DEMA, TEMA, TRIMA, KAMA, MAMA, T3 (default: null)
    --default_ma_type=<value>  set default ma_type for fast, slow and signal. You are able to overwrite single types separately (fast_ma_type, slow_ma_type, signal_ma_type) (default: SMA)
    --up_trend_threshold=<value>  threshold to trigger a buy signal (default: 0)
    --down_trend_threshold=<value>  threshold to trigger a sold signal (default: 0)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 25)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 70)

ta_trix
  description:
    TRIX - 1-day Rate-Of-Change (ROC) of a Triple Smooth EMA with rsi oversold
  options:
    --period=<value>  period length eg 10m (default: 5m)
    --timeperiod=<value>  timeperiod for TRIX (default: 30)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 25)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 70)

trend_ema (default)
  description:
    Buy when (EMA - last(EMA) > 0) and sell when (EMA - last(EMA) < 0). Optional buy on low RSI.
  options:
    --period=<value>  period length, same as --period_length (default: 2m)
    --period_length=<value>  period length, same as --period (default: 2m)
    --min_periods=<value>  min. number of history periods (default: 52)
    --trend_ema=<value>  number of periods for trend EMA (default: 26)
    --neutral_rate=<value>  avoid trades if abs(trend_ema) under this float (0 to disable, "auto" for a variable filter) (default: auto)
    --oversold_rsi_periods=<value>  number of periods for oversold RSI (default: 14)
    --oversold_rsi=<value>  buy when RSI reaches this value (default: 10)

ta_ppo
  description:
     PPO - Percentage Price Oscillator with rsi oversold
  options:
    --period=<value>  period length, same as --period_length (default: 10m)
    --ema_short_period=<value>  number of periods for the shorter EMA (default: 12)
    --ema_long_period=<value>  number of periods for the longer EMA (default: 26)
    --signal_period=<value>  number of periods for the signal EMA (default: 9)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 25)
    --ma_type==<value> moving average type of talib: SMA, EMA, WMA, DEMA, TEMA, TRIMA, KAMA, MAMA, T3 (default: SMA)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 70)

ta_ultosc
  description:
    ULTOSC - Ultimate Oscillator with rsi oversold
  options:
    --period=<value>  period length eg 5m (default: 5m)
    --min_periods=<value>  min. number of history periods (default: 52)
    --signal=<value>  Provide signal and indicator "simple" (buy@65, sell@50), "low" (buy@65, sell@30), "trend" (buy@30, sell@70) (default: simple)
    --timeperiod1=<value>  talib ULTOSC timeperiod1 (default: 7)
    --timeperiod2=<value>  talib ULTOSC timeperiod2 (default: 14)
    --timeperiod3=<value>  talib ULTOSC timeperiod3 (default: 28)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 25)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 90)

ti_hma
  description:
    HMA - Hull Moving Average
  options:
    --period=<value>  period length eg 10m (default: 15m)
    --min_periods=<value>  min. number of history periods (default: 52)
    --trend_hma=<value>  number of periods for trend hma (default: 36)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 25)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 70)

trendline
  description:
    Calculate a trendline and trade when trend is positive vs negative.
  options:
    --period=<value>  period length (default: 30s)
    --period_length=<value>  period length (default: 30s)
    --lastpoints=<value>  Number of trades for short trend average (default: 100)
    --avgpoints=<value>  Number of trades for long trend average (default: 1000)
    --lastpoints2=<value>  Number of trades for short trend average (default: 10)
    --avgpoints2=<value>  Number of trades for long trend average (default: 100)
    --min_periods=<value>  Basically avgpoints + a BUNCH of more preroll periods for anything less than 5s period (default: 15000)
    --markup_sell_pct=<value>  test (default: 0)
    --markdown_buy_pct=<value>  test (default: 0)

trust_distrust
  description:
    Sell when price higher than $sell_min% and highest point - $sell_threshold% is reached. Buy when lowest price point + $buy_threshold% reached.
  options:
    --period=<value>  period length, same as --period_length (default: 30m)
    --period_length=<value>  period length, same as --period (default: 30m)
    --min_periods=<value>  min. number of history periods (default: 52)
    --sell_threshold=<value>  sell when the top drops at least below this percentage (default: 2)
    --sell_threshold_max=<value>  sell when the top drops lower than this max, regardless of sell_min (panic sell, 0 to disable) (default: 0)
    --sell_min=<value>  do not act on anything unless the price is this percentage above the original price (default: 1)
    --buy_threshold=<value>  buy when the bottom increased at least above this percentage (default: 2)
    --buy_threshold_max=<value>  wait for multiple buy signals before buying (kill whipsaw, 0 to disable) (default: 0)
    --greed=<value>  sell if we reach this much profit (0 to be greedy and either win or lose) (default: 0)

wavetrend
  description:
    Buy when (Signal < Oversold) and sell when (Signal > Overbought).
  options:
    --period=<value>  period length, same as --period_length (default: 1h)
    --period_length=<value>  period length, same as --period (default: 1h)
    --min_periods=<value>  min. number of history periods (default: 21)
    --wavetrend_channel_length=<value>  wavetrend channel length (default: 10)
    --wavetrend_average_length=<value>  wavetrend average length (default: 21)
    --wavetrend_overbought_1=<value>  wavetrend overbought limit 1 (default: 60)
    --wavetrend_overbought_2=<value>  wavetrend overbought limit 2 (default: 53)
    --wavetrend_oversold_1=<value>  wavetrend oversold limit 1 (default: -60)
    --wavetrend_oversold_2=<value>  wavetrend oversold limit 2 (default: -53)
    --wavetrend_trends=<value>  act on trends instead of limits (default: false)
    --overbought_rsi_periods=<value>  number of periods for overbought RSI (default: 9)
    --overbought_rsi=<value>  sold when RSI exceeds this value (default: 80)

Interactive controls

While the trade command is running, Zenbot will respond to these keypress commands:

Pressing b will trigger a buy, s for sell, and B and S for market (taker) orders.
Pressing c or C will cancel any active orders.
Pressing m or M will toggle manual mode (--manual)

These commands can be used to override what the bot is doing. Or, while running with the --manual flag, this allows you to make all the trade decisions yourself.

noop strategy

If you want to use the bot without it trading for you, but just use it for the balance overview and manual trades, you can start the bot with --strategy noop, the bot will not trade automatically.

Conf/argument override files

To run trade or sim commands with a pre-defined set of options, use:

zenbot trade --conf <path>

Where <path> points to a JS file that exports an object hash that overrides any conf or argument variables. For example, this file will run gdax.ETH-USD with options specific for that market:

var c = module.exports = {}

// ETH settings (note: this is just an example, not necessarily recommended)
c.selector = 'gdax.ETH-USD'
c.period = '10m'
c.trend_ema = 20
c.neutral_rate = 0.1
c.oversold_rsi_periods = 20
c.max_slippage_pct = 10
c.order_adjust_time = 10000

GUI

A basic web UI is available at the url stated during startup. This port can be configured in the conf.js or randomly assigned. In it's infancy, there are a few caveats with the current UI.

In order to have statistics displayed, they must first be dumped from the CLI. Pressing D will refresh the statistics on each refresh of the dashboard.
Currently the data is mostly static with the exception of the tradingview charts.
Currently only READ-ONLY

Reading the console output

From left to right:

Timestamp in local time (grey, blue when showing "live" stats)
Asset price in currency (yellow)
Percent change of price since last period (red/green)
Volume in asset since last period (grey)
RSI ANSI graph (red/green)
trend_ema_rate (red/green, explained below)
Current signal or action, including buy, sell, buying, selling, bought, sold and last_trade_worth (percent change in the trend direction since last buy/sell)
Account balance (asset)
Account balance (currency)
Profit or loss percent (can be reset with --reset_profit)
Gain or loss vs. buy/hold strategy

Strategies

The `trend_ema` strategy (default)

The default strategy is called trend_ema and resides at ./extensions/strategies/trend_ema.
Defaults to using a 2m period, but you can override this with adding e.g. --period=5m to the sim or trade commands.
Computes the 26-period EMA of the current price, and calculates the percent change from the last period's EMA to get the trend_ema_rate
Considers trend_ema_rate >= 0 an upwards trend and trend_ema_rate < 0 a downwards trend
Filters out low values (whipsaws) by neutral_rate, which when set to auto, uses the standard deviation of the trend_ema_rate as a variable noise filter.
Buys at the beginning of upwards trend, sells at the beginning of downwards trend
If oversold_rsi is set, tries to buy when the RSI dips below that value, and then starts to recover (a counterpart to --profit_stop_enable_pct, which sells when a percent of profit is reached, and then dips)
The bot will always try to avoid trade fees, by using post-only orders and thus being a market "maker" instead of a "taker". Some exchanges will, however, not offer maker discounts.

The `macd` strategy

The moving average convergence divergence calculation is a lagging indicator, used to follow trends.

Can be very effective for trading periods of 1h, with a shorter period like 15m it seems too erratic and the Moving Averages are kind of lost.
It's not firing multiple 'buy' or 'sold' signals, only one per trend, which seems to lead to a better quality trading scheme.
Especially when the bot will enter in the middle of a trend, it avoids buying unless it's the beginning of the trend.

The `rsi` strategy

Attempts to buy low and sell high by tracking RSI high-water readings.

Effective in sideways markets or markets that tend to recover after price drops.
Risky to use in bear markets, since the algorithm depends on price recovery.
If the other strategies are losing you money, this strategy may perform better, since it basically "reverses the signals" and anticipates a reversal instead of expecting the trend to continue.

The `sar` strategy

Uses a Parabolic SAR indicator to trade when SAR trend reverses.

Tends to generate earlier signals than EMA-based strategies, resulting in better capture of highs and lows, and better protection against quick price drops.
Does not perform well in sideways (non-trending) markets, generating more whipsaws than EMA-based strategies.
Most effective with short period (default is 2m), which means it generates 50-100 trades/day, so only usable on GDAX (with 0% maker fee) at the moment.
Tested live, results here

The `speed` strategy

Trade when % change from last two 1m periods is higher than average.

This strategy is experimental and has WILDLY varying sim results. NOT RECOMMENDED YET.

Like the sar strategy, this generates early signals and can be effective in volatile markets and for sudden price drop protection.
Its weakness is that it performs very poorly in low-volatility situations and misses signals from gradually developing trends.

Tips for tweaking options

Trade frequency is adjusted with a combination of --period and --trend_ema. For example, if you want more frequent trading, try --period=5m or --trend_ema=15 or both. If you get too many ping-pong trades or losses from fees, try increasing period or trend_ema or increasing neutral_rate.
Sometimes it's tempting to tell the bot trade very often. Try to resist this urge, and go for quality over quantity, since each trade comes with a decent amount of slippage and whipsaw risk.
--oversold_rsi=<rsi> will try to buy when the price dives. This is one of the ways to get profit above buy/hold, but setting it too high might result in a loss if the price continues to fall.
In a market with predictable price surges and corrections, --profit_stop_enable_pct=10 will try to sell when the last buy hits 10% profit and then drops to 9% (the drop % is set with --profit_stop_pct). However in strong, long uptrends this option may end up causing a sell too early.
For Kraken and GDAX you may wish to use --order_type="taker", this uses market orders instead of limit orders. You usually pay a higher fee, but you can be sure that your order is filled instantly. This means that the sim will more closely match your live trading. Please note that GDAX does not charge maker fees (limit orders), so you will need to choose between not paying fees and running the risk orders do not get filled on time, or paying somewhat high % of fees and making sure your orders are always filled on time.

Notifiers

Zenbot employs various notifiers to keep you up to date on the bot's actions. We currently send a notification on a buy and on a sell signal.

pushbullet

Supply zenbot with your api key and device ID and we will send your notifications to your device. https://www.pushbullet.com/

Slack

Supply zenbot with a webhook URI and zenbot will push notifications to your webhook. https://slack.com/

XMPP

Supply zenbot with your XMPP credentials and zenbot will send notifications by connecting to your XMPP, sending the notification, and disconnecting. https://xmpp.org/

IFTTT

Supply zenbot with your IFTTT maker key and zenbot will push notifications to your IFTTT. https://ifttt.com/maker_webhooks

DISCORD

Supply zenbot with your Discord webhook id and webhook token zenbot will push notifications to your Discord channel.

How to add a webhook to a Discord channel https://support.discordapp.com/hc/en-us/articles/228383668

Prowl

Supply zenbot with your Prowl API key and zenbot will push notifications to your Prowl enabled devices. https://www.prowlapp.com/

TextBelt

Supply zenbot with your TextBelt API key and zenbot will send SMS notifications to your cell phone. https://www.textbelt.com/

Rest API

You can enable a Rest API for Zenbot by enabling the following configuration

c.output.api = {}
c.output.api.on = true
c.output.api.port = 0 // 0 = random port

You can choose a port, or pick 0 for a random port.

Once you did that, you can call the API on: http://<hostname>:<port>/trades

Manual trade tools

Zenbot's order execution engine can also be used for manual trades. Benefits include:

Avoids market-order fees by using a short-term limit order
Can automatically determine order size from account balance
Adjusts order every 30s (if needed) to ensure quick execution
If an order is partially filled, attempts to re-order with remaining size

The command to buy is:

zenbot buy <selector> [--size=<size>] [--pct=<pct>]

For example, to use your remaining USD balance in GDAX to buy Bitcoin:

zenbot buy gdax.BTC-USD

Or to sell 10% of your BTC,

zenbot sell gdax.BTC-USD --pct=10

Chat with other Zenbot users

Zenbot has a Discord chat! You can get in through this invite link.

Donate

P.S., some have asked for how to donate to Zenbot development. We accept donations at Bitcoin addresses below:

carlos8f's BTC (original zenbot author)

187rmNSkSvehgcKpBunre6a5wA5hQQop6W

DeviaVir's BTC (current maintainer)

3BZojxm9q8uGWvvsudLCmqfBhtT7ceeSQk

Thanks!

License: MIT

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

aadityatamrakar/zenbot