aanon4/BlueBasic

Issues

• Using TI serial bootloader for BlueBasic

  #18 opened 9 years ago by 0xFACE
  4

• how to load basic programs on the chip?

  #30 opened 8 years ago by pabloxid
  10

• Writing Array fails

  #33 opened 8 years ago by kscheff
  10

• OSX 10.12 Sierra fails

  #31 opened 8 years ago by kscheff
  6

• How to create characteristics with uint8 value respond

  #28 opened 8 years ago by 0xFACE
  4

• UPGRADE AVAILBLE message in console status

  #35 opened 8 years ago by Netoperz
  0

• How to use SCAN ?

  #24 opened 9 years ago by mikewen
  2

• compiler instructions for HM10, cc2541, want to upload blestack 1.4.2.2 updated hex files?

  #29 opened 8 years ago by user3bss
  3

• Flashstore gets corrupted and programs gets garbled

  #34 opened 8 years ago by kscheff
  0

• Large numbers > 536870912 (1<<29) are wrongly computed

  #32 opened 8 years ago by kscheff
  1

• No console on appstore :(

  #21 opened 9 years ago by pxa398
  1

• How to compile CC2540 version?

  #17 opened 10 years ago by Parrrk
  1

• BlueBasic console for linux

  #27 opened 8 years ago by 0xFACE
  1

• A witten program, can it be saved to create a permanently configured device?

  #25 opened 9 years ago by bossesand
  1

• Question - Can a basic program be saved and survive a power off

  #26 opened 8 years ago by bossesand
  3

• Console App OSX

  #9 opened 10 years ago by paulsponagl
  8

• How to connect do fresh flashed device ?

  #19 opened 9 years ago by 0xFACE
  7

• How to use ADC?

  #23 opened 9 years ago by mikewen
  1

• Wiki typo on "Pin names and uses"

  #22 opened 9 years ago by 0x2b3bfa0
  4

• loading BlueBasic using this method possible?

  #20 opened 9 years ago by lorneb
  6

• Serial/UART handshaking

  #12 opened 10 years ago by mikewen
  4

• Accessing pin 14/15 on 2541

  #16 opened 10 years ago by jtagen
  1

• Example on how to read from BLE slave?

  #13 opened 10 years ago by mikewen
  2

• Unable to use P2_1 through P2_4 for output

  #14 opened 10 years ago by jtagen
  5

• Pins and names CC2540

  #5 opened 10 years ago by gregwinn
  8

• Run basic code after reboot ?

  #11 opened 10 years ago by mikewen
  2

• Blue Basic IOS not connecting

  #10 opened 10 years ago by paulsponagl
  4

• Setting the advertisement interval after reboot?

  #8 opened 10 years ago by svenhaitjema
  3

• Beacon dies after 48 hours?

  #7 opened 10 years ago by gregwinn
  22

• Advertising interval

  #2 opened 10 years ago by gregwinn
  14

• Set Major Minor (iBeacon)

  #4 opened 10 years ago by gregwinn
  17

• Upgradable

  #6 opened 10 years ago by gregwinn
  3

• How do I install this?

  #1 opened 10 years ago by gregwinn
  13