aaron-siegel/puzzlecad

Issues

• puzzlecad-examples error

  #67 opened 2 years ago by Hickname
  1

• Snap Joint Too Tight

  #71 opened a year ago by p2e-I
  1

• Version 2.4 is required but not released.

  #72 opened a year ago by LarGriff
  0

• packing_box problem

  #70 opened a year ago by tudall
  0

• Packing Trays

  #69 opened 2 years ago by Freaksta
  0

• Broken thingiverse links on puzzlehub website

  #68 opened 2 years ago by MQQ
  0

• What is Burr vs Joint inset?

  #63 opened 3 years ago by crabbedh
  1

• Eliminating bevel on joint faces

  #66 opened 2 years ago by TomFrost
  0

• AutoLayout with detatched joints

  #64 opened 2 years ago by gmerick-mn
  0

• $box_bevel - does it work?

  #56 opened 3 years ago by crabbedh
  6

• Invalid polyhedron error with diagonal geometry

  #47 opened 4 years ago by akakikuumeri
  2

• puzzle joints don't work below small $burr_scale (under 5)

  #62 opened 3 years ago by smiteo
  0

• Issue with manual connectors in packing_box

  #58 opened 3 years ago by crabbedh
  1

• Shackle will not render with "normal" bevel

  #61 opened 3 years ago by crabbedh
  0

• v2.3 packing_box() $auto_layout

  #53 opened 3 years ago by ninjabunny
  1

• CGAL ERROR when rendering puzzle,

  #49 opened 3 years ago by kageurufu
  1

• Installation directory

  #44 opened 4 years ago by anthonysteed
  0

• Failure to render large pieces

  #39 opened 4 years ago by tomburns
  0

• incorrect path in puzzlecad-geom?

  #37 opened 5 years ago by akoehn
  0

• Licensing choice

  #20 opened 5 years ago by akoehn
  4

• OpenSCAD 2019.5 + puzzlecad 1.3 rendering bug

  #4 opened 5 years ago by ursoft
  1