For easy setup use my Flash Homepage: https://vr6syncro.de/programmer/flash.html There are compiled Version for installation.
Otherwise clone repository and flash with Arduino IDE.
Up to 6 Led is supported with internal USB Power on the Wemos D1 mini if u are not modify the brightness in the firmware otherwise there ther might be some issues.
- 5V Power pin to LED + / 5V Pin
- G / Ground pin to G / Ground Pin
- D2 pin to DIN on the first LED
There is maybe also a arrow on the led. This must face away from the wemos side. like: wemos d2 -> din -> dout -> din .....
If you use a Led Strip thats it otherwise you continue soldering from the dout side of the led to the next led din side.
You can find out how the compiled images were configured in the release notes.
Wich effect is played on wich action is stored in handle.h The effects are stored in effects.h, i would advise against changing anything there.
For more infos and help see my discord at: http://discord.vr6syncro.de
3D Print related files are uploaded to: https://www.printables.com/de/model/499286-bambulab-neopixel-status-indicator
There are a few things that must be solved to get it stable but is is already working.
The BL Led Controller is released under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) license. See the LICENSE file for more details.