abacao/hass_wibeee

Home Assistant Component: Mirubee or Wibeee

Home Assistant: Wibeee Component

This is a custom component developed original for its integration with Circuitor Wibeee (3 Phases)

This concept has been proved on similar devices that are listed below:

Device	Model	Link
Circuitor Wibeee	3 phases	http://wibeee.circutor.com/index_en.html
Circuitor Wibeee	1 phase	http://wibeee.circutor.com/index_en.html
Mirubee	Unknown models	https://mirubee.com/es/3-productos

How it works

Once the devices are installed and connected to local wireless network, current energy consumption values are exposed in xml format, the URL of the exposed web service is:

http://<wibeee_ip>/en/status.xml

Example XML are listed here in github repository

Installation

Use HACS or follow the manual instructions below.

HACS

Custom repository installation:

1. Open HACS
2. Go to integrations
3. On the top right corner, click on the 3 dots and select Custom repositories
4. Add this repo URL https://github.com/abacao/hass_wibeee and select Integration as category.
5. Install and follow the instructions of the manual installation from the 2nd bullet point onwards.

Home Assistant manual installation

1.- Clone repo into <hass_folder>/custom_components

git clone https://github.com/abacao/hass_wibeee.git <hass_folder>/custom_components/wibeee

2.- Add device to home assistant configuration file configuration.yaml

sensor:
- platform: wibeee
  host: 192.168.xx.xx

Optional 3.- Add new created sensors to groups.yaml

supplies_view:
  view: yes
  name: Supplies
  #icon: mdi:network
  entities:
    - group.wibeee_phase1
    - group.wibeee_phase2
    - group.wibeee_phase3
    - group.wibeee_phase4
....

....
wibeee_phase1:
  name: 'Wibeee Phase 1'
  entities:
    - sensor.wibeee_phase1_active_energy
    - sensor.wibeee_phase1_active_power
    - sensor.wibeee_phase1_apparent_power
    - sensor.wibeee_phase1_capacitive_reactive_energy
    - sensor.wibeee_phase1_capacitive_reactive_power
    - sensor.wibeee_phase1_frequency
    - sensor.wibeee_phase1_inductive_reactive_energy
    - sensor.wibeee_phase1_inductive_reactive_power
    - sensor.wibeee_phase1_irms
    - sensor.wibeee_phase1_power_factor
    - sensor.wibeee_phase1_vrms
wibeee_phase2:
  name: 'Wibeee Phase 2'
  entities:
    - sensor.wibeee_phase2_active_energy
    - sensor.wibeee_phase2_active_power
    - sensor.wibeee_phase2_apparent_power
    - sensor.wibeee_phase2_capacitive_reactive_energy
    - sensor.wibeee_phase2_capacitive_reactive_power
    - sensor.wibeee_phase2_frequency
    - sensor.wibeee_phase2_inductive_reactive_energy
    - sensor.wibeee_phase2_inductive_reactive_power
    - sensor.wibeee_phase2_irms
    - sensor.wibeee_phase2_power_factor
    - sensor.wibeee_phase2_vrms
wibeee_phase3:
  name: 'Wibeee Phase 3'
  entities:
    - sensor.wibeee_phase3_active_energy
    - sensor.wibeee_phase3_active_power
    - sensor.wibeee_phase3_apparent_power
    - sensor.wibeee_phase3_capacitive_reactive_energy
    - sensor.wibeee_phase3_capacitive_reactive_power
    - sensor.wibeee_phase3_frequency
    - sensor.wibeee_phase3_inductive_reactive_energy
    - sensor.wibeee_phase3_inductive_reactive_power
    - sensor.wibeee_phase3_irms
    - sensor.wibeee_phase3_power_factor
    - sensor.wibeee_phase3_vrms
wibeee_phase4:
  name: 'Wibeee Phase 4 = Total'
  entities:
    - sensor.wibeee_phase4_active_energy
    - sensor.wibeee_phase4_active_power
    - sensor.wibeee_phase4_apparent_power
    - sensor.wibeee_phase4_capacitive_reactive_energy
    - sensor.wibeee_phase4_capacitive_reactive_power
    - sensor.wibeee_phase4_frequency
    - sensor.wibeee_phase4_inductive_reactive_energy
    - sensor.wibeee_phase4_inductive_reactive_power
    - sensor.wibeee_phase4_irms
    - sensor.wibeee_phase4_power_factor
    - sensor.wibeee_phase4_vrms

Set Logger in Home Assistant

To setup logger for this custom component add following lines to configuration.yaml

logger:
  default: warn
  logs:
    custom_components.wibeee.sensor: info

Possible log levels: info, debug, warn, ...

Example View in Home Assistant

ToDo

There is a new project in Github, a CLI in Python for these devices that may be helpful for future integrations of this custom component: https://github.com/fquinto/pywibeee

Useful links

Home Assistant community https://community.home-assistant.io/t/new-integration-energy-monitoring-device-circutor-wibeee/45276

Original creator for this integration https://github.com/juanjoSanz/hass_wibeee

custom_components examples

YR Sensor (async) https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/yr/sensor.py

RFLink Sensor (async) https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/rflink/sensor.py

Blueprint https://github.com/custom-components/blueprint/blob/master/custom_components/blueprint/sensor.py

Youtube Sensor https://github.com/custom-components/youtube/blob/master/custom_components/youtube/sensor.py

Linky Energy Sensor https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/linky/sensor.py

Other https://github.com/kstaniek/hass-ampio/blob/master/custom_components/sensor/ampio.py https://github.com/custom-components/sensor.versions/blob/master/custom_components/sensor/versions.py

Solax (async) https://github.com/squishykid/home-assistant/blob/23ca4160036f26e9ad08729950ae496b0aabecd0/homeassistant/components/solax/sensor.py