English | δΈζ
- Install the following two dependencies
- Adafruit-GFX-Library
- For the 1.54" red black and white, the sample program uses
GxEPD2
as the driver, you need to install ZinggJM/GxEPD2, for other models, please use this branch lewisxhe/fork/GxEPD,Please note that referencing the wrong branch will cause the program to fail to compile
- At the top of the sketch, define the model of the board and screen to be used
- Select
ESP32 Dev Module
in the development board, and keep the other options as default - If you do not find the ESP32 series in the development board, then you should see the following installation method How to install ESP32 in ArduinoIDE
- For the version of the board you purchased, please check the product link below
- When you think there is a problem with your board, you can pull the binary file corresponding to your screen model in the firmware directory, follow the
SETTING.png
settings in the directory, download it to the board, and then observe the execution.
Examples | Product Link | Schematic | Status |
---|---|---|---|
T5 V2.2 | Product link | Schematic | β |
T5 V2.3 | Product link | Schematic | β |
T5 V2.4 | Product link | Schematic | β |
T5 V2.8 | Product link | Schematic | β |
examples
βββ GxEPD2_Z90_Eaxmple # 1.54" red black and white three-color electronic paper example,
βββ GxEPD_Example # Suitable for all LilyGo electronic paper
βββ GxEPD_Example_MP3 # Example of playing MP3
βββ GxEPD_U8G2_Fonts_Example # U8g2 font example
βββ GxEPD_Partial_Update_Example # Partial refresh example