/zubax_chibios

WARNING: NOT FOR NEW PROJECTS. This repository is being refactored into a set of separate, independent libraries. When the refactoring is finished, this repository will be archived and sealed.

Primary LanguageC++MIT LicenseMIT

ChibiOS libs

Join the chat at https://gitter.im/Zubax/general

WARNING: NOT FOR NEW PROJECTS. This repository is being refactored into a set of separate, independent libraries. When the refactoring is finished, this repository will be archived and sealed.

Build system and libraries for ChibiOS-based embedded software.

Basic usage:

  1. Add this repository as git submodule for your project, e.g.: git submodule add https://github.com/Zubax/zubax_chibios firmware/zubax_chibios
  2. Execute git submodule update --init from this repository's root
  3. Define the ChibiOS configuration headers: chconf.h halconf.h mcuconf.h board.h
  4. Write the makefile:
    1. List the source files in CSRC CPPSRC
    2. List the include directories in UINCDIR
    3. Define PROJECT and SERIAL_CLI_PORT_NUMBER
    4. Include zubax_chibios/rules_<target-mcu>.mk, e.g. include zubax_chibios/rules_stm32f105_107.mk

Debugging using Eclipse and Black Magic Debug Probe

  • Open your Eclipse project
  • Go Eclipse → Window → Preferences → Run/Debug → Launching → Default Launchers:
    • Select GDB Hardware Debugging → [Debug], then tick only Legacy GDB Hardware Debugging Launcher, and make sure that the option for GDB (DSF) is disabled.
  • Go Eclipse → Run → Debug Configurations:
    • Invoke the context menu for GDB Hardware Debugging, select New.
    • Tab Debugger:
      • Set the field GDB Command to arm-none-eabi-gdb (or other if necessary).
      • Untick Use remote target.
    • Tab Startup:
      • If a boot loader is used, make sure that Image offset is configured correctly.
      • Enter the following in the field Initialization Commands:
target extended <BLACK_MAGIC_SERIAL_PORT>
monitor swdp_scan   # Use jtag_scan instead if necessary
attach 1