Traefik v2.1 (docker-compose)

Traefik:2.1 load balancer and reverse proxy server using docker-compose. Get SSL/TLS certificates automatically using traefik dynamic configurations. Automatically obtain wildcard/SANs certificates for your domain using traefik (lego) with DNS TXT record propagation.

Installation

Copy env.example to .env
Change .env variable values as needed (keep LOG_LEVEL=DEBUG)
To generate a new username:password, use htpasswd -nb user pass, then copy user to DASHBOARD_USER and pass to DASHBOARD_PASSWORD in .env file
Change any config in docker-compose.yml if necessary
To validate and view the Compose file run docker-compose config
Create a network sudo doccker network create net as defined NETWORK in .env
Create acme.json file, sudo touch acme.json && sudo chmod 600 acme.json
Start the container using docker-compose up or docker-compose up -d
Browse to dashboard.localhost or the dashboard url you defined (see in .env)
If you are using localhost, allow the self-signed certificate on your browser (Accept/Proceed in advanced option)
Login using user:pass (or what you have set in .env file)
To stop (docker-compose stop) and remove the containers run docker-compose down

Optionally, you can use the bash scripts in scripts directory

Generate the files needed

cp env.example .env

touch acme.json
chmod 600 acme.json

touch provider.key
echo "supersecretkey" | tee provider.key
chmod 600 provider.key

Add provider's API token/key to provider.key file if you are using DNS challenge.

Generate a user:password for dashboard authentication

htpasswd -nb USERNAME PASSWORD

After running this, copy the generated user:pass to .env file.

Create Network

Edit NETWORK in .env file then run

eval $(egrep '^NETWORK' .env | xargs)
docker network create $NETWORK | echo

Widcard/SANs certificate (Letsencrypt)

To obtain wildcard/SANs certificate, you must have access to your provider's (i.e. digitalocean) dns records with READ & WRITE permission.

Note: Letsencrypt uses rate limiting, Certificates per Registered Domain (50 per week), to ensure fair usage. So, the CA_SERVER is set to staging server (gives you a fake certificate issued by Fake LE Intermediate X1) in the env file so that you dont burn out your limit testing initially. If you don't care about the limit or 50 per week is a lot for you, change it to actual server and roll with it. Otherwise, Change all the config in .env file, test using staging server. Then, change it to actual server (commented CA_SERVER in env file) when everything is functional.

Follow the steps below:

Follow the Instructions mentioned at the top of this README until step 8 (don't run docker-compose up yet)
Find your provider here: https://docs.traefik.io/https/acme/#providers
Edit PROVIDER, PROVIDER_ENV_FILE, PROVIDER_ENV_FILE_VALUE in .env file
Store your provider's API key to the file, on host machine, as defined in PROVIDER_ENV_FILE_VALUE (i.e. ./provider.key)
If you are using a firewall on your server, You may need to allow incoming traffic over port 53 (Unconfirmed)
Start using docker-compose up (avoid running as daemon docker-compose up -d so that we can see the logs in stdout)
Note: It might vary how long it will take to validate dns txt info, for example with digitalocean dns provider it doesnt take very long. If you are using linode dns provider (tested on nanode), go for a coffee, come back after 10-15 mins
If the dns propagation validation is successful, you will see "legolog: [INFO] [domain.tld, *.domain.tld] acme: Validations succeeded; requesting certificates" in the logs (docker-compose logs traefik)
Now that you have tested your configuration on letsencrypt staging server, stop the traefik container (ctrl+c if you used docker-compose up, docker-compose down if you used docker-compose up -d)
Change the CA_SERVER environment variable to the main server in env file (uncomment it)
Remove & recreate acme.json. sudo rm acme.json && sudo touch acme.json && sudo chmod 600 acme.json
Run docker-compose up
You will see "legolog: [INFO] [domain.tld] Server responded with a certificate." if successful
Browse to your dashboard to make sure if the certificates are working (maybe refresh the page few times with ctrl + shift + r)
You will see that traefik (lego) has got you a fresh wildcard SSL/TLS certificate (with some manual labor :p) auto-magically!

Run as a systemctl (linux) service (optional)

Copy/soft-link this directory as /srv/traefik or you can change WorkingDirectory=/srv/traefik to your desired directory in traefik.service file (user absolute path only, don not use $PWD or relative path in this file).
Link traefik.service file to /etc/systemd/system/traefik.service using sudo ln -s /srv/traefik/traefik.service /etc/systemd/system/traefik.service
Reload systemctl daemon using sudo systemctl daemon-reload
To start the service use sudo systemctl start traefik.service or sudo service traefik start
To see status of the service use sudo systemctl status traefik.service or sudo service traefik status
To restart the service use sudo systemctl restart traefik.service or sudo service traefik restart
To stop the service use sudo systemctl stop traefik.service or sudo service traefik stop

After you make sure that your traefik container is running properly, you can run the following to start it as a systemd service.

Inside your traefik direcory, run the following:

docker-compose down
sudo ln -s $(pwd) /srv/traefik
sudo ln -s /srv/traefik/traefik.service /etc/systemd/system/traefik.service
sudo systemctl daemon-reload
sudo systemctl start traefik.service

What is Træfɪk

Træfɪk is a modern HTTP reverse proxy and load balancer that makes deploying microservices easy. Træfik integrates with your existing infrastructure components (Docker, Swarm mode, Kubernetes, Marathon, Consul, Etcd, Rancher, Amazon ECS, ...) and configures itself automatically and dynamically. Telling Træfik where your orchestrator is could be the only configuration step you need to do.

What is Docker Compose

Compose is a tool for defining and running multi-container Docker applications. With Compose, you use a Compose file to configure your application's services. Then, using a single command, you create and start all the services from your configuration. To learn more about all the features of Compose see the list of features.

Compose is great for development, testing, and staging environments, as well as CI workflows. You can learn more about each case in Common Use Cases.

Contribute

Any contribution to this project is warmly welcomed. I did what I could to cover possible edge cases and make it so that you don't have to edit the compose file if you don't want to, but if you find any weakness or mistake, please let me know.

There are over 50 providers for dns-challenge, I only tested 2 of them. If you happen to use one of the others, feel free to include them in the environment example file (env.example) or compose file. I will be happy to recieve any PR :)

abmruman/traefik-docker-compose