achim1/muonic

Issues

• QT5 bindings

  #82 opened 3 years ago by sctobias
  1

• Muon Rates - Fixed run

  #80 opened 8 years ago by csteppa
  0

• GPS sensor works, but "Invalid" in GUI

  #79 opened 8 years ago by JaBecker
  5

• Change DAQ Trigger/Channel Settings if necessary when starting decay or velocity measurement.

  #74 opened 9 years ago by hpbretz
  1

• Add line to all relevant files (L/D, P, R) when starting a decay or velocity measurement.

  #75 opened 9 years ago by hpbretz
  1

• Puls Analyzer

  #78 opened 9 years ago by caroschwerdt
  0

• Start/Stop-Funktion auch für Puls-, Lebensdauer- und Geschwindigkeitsmessung

  #77 opened 9 years ago by caroschwerdt
  0

• Geschwindigkeitsmessung: Fitparamter

  #76 opened 9 years ago by caroschwerdt
  0

• Muon decay measurement with CosMO detectors: problem with veto

  #34 opened 9 years ago by aschulzdesy
  8

• Rename L files to D files to be constistent with English naming

  #70 opened 9 years ago by hpbretz
  0

• The fit to a histogram is unstable and the result varies strongly with the selected range.

  #56 opened 9 years ago by hpbretz
  0

• Add Status Text to Decay and Velocity Widgets.

  #73 opened 9 years ago by hpbretz
  0

• Change Check Box in Velocity Widget to Start and Stop Button

  #72 opened 9 years ago by hpbretz
  0

• Change check box in Decay Widget to Start and Stop Button

  #71 opened 9 years ago by hpbretz
  0

• 'Status': does not show properly the muon decay configuration

  #45 opened 9 years ago by aschulzdesy
  7

• "Writing P-File" doest not appear in status

  #65 opened 9 years ago by caroschwerdt
  1

• Add runtime to decay measurment

  #67 opened 9 years ago by caroschwerdt
  1

• Status under muon velocity

  #68 opened 9 years ago by caroschwerdt
  0

• Start rate measurement together with mu decay measurement

  #51 opened 9 years ago by achim1
  8

• latex dependeny

  #69 opened 9 years ago by achim1
  0

• muon decay and flight time: new measurement does not start with new plot

  #46 opened 9 years ago by aschulzdesy
  3

• some problem about installing the muonic

  #60 opened 9 years ago by johnny8266
  9

• trigger rate and channel rate do not match if used in single trigger mode with one detector

  #58 opened 9 years ago by musner
  3

• Add possibility to check status and software settings of ongoing measurement

  #66 opened 9 years ago by hpbretz
  0

• extend automatic plot range of trigger rate to a commonly used measurement time (5 or 10 min)

  #59 opened 9 years ago by musner
  1

• Time in fils is different time zone

  #61 opened 9 years ago by hpbretz
  0

• Pulsefilenames date format not consistent

  #52 opened 9 years ago by achim1
  8

• Change help -> manual to website with manual and put it first

  #63 opened 9 years ago by hpbretz
  1

• Link DAQ user manual in help menu

  #62 opened 9 years ago by hpbretz
  0

• Advanced configuration -> Readout intervall: "intervall" should be capitalized

  #64 opened 9 years ago by hpbretz
  1

• a new tab with only trigger counts as a huge number

  #38 opened 9 years ago by aschulzdesy
  1

• Muon rates: daq time sometimes not shown in multiplicities of 5s

  #43 opened 9 years ago by aschulzdesy
  1

• Add logging info that prints fit results for decay and velocity.

  #57 opened 9 years ago by hpbretz
  0

• daq time does not start with "start run" when starting for the first time

  #53 opened 9 years ago by aschulzdesy
  10

• Is it wanted that the trigger is "off" (so not displayed) if coincidence is set to single?

  #55 opened 9 years ago by aschulzdesy
  4

• muon decay: 2 fits shown at the same time

  #33 opened 9 years ago by aschulzdesy
  1

• Muon decay fit: fit-range with decimal points

  #39 opened 9 years ago by aschulzdesy
  0

• 'Help section' neither technical documentation nor Manual open

  #44 opened 9 years ago by aschulzdesy
  4

• "scaler" is not an english word

  #35 opened 9 years ago by aschulzdesy
  3

• Unify "coincidence" in settings and "trigger”

  #54 opened 9 years ago by aschulzdesy
  0

• flight time measurement: no fitline shown

  #42 opened 9 years ago by aschulzdesy
  6

• Error on velocity measurement

  #37 opened 9 years ago by aschulzdesy
  0

• Decay plot: fit leads to histogram not shown completely

  #32 opened 9 years ago by aschulzdesy
  4

• ZeroDivisionError in Rate Calculation

  #49 opened 9 years ago by achim1
  2

• I/OError when quiting muonic

  #50 opened 9 years ago by achim1
  0

• What happened to the sphinx documentation?

  #36 opened 9 years ago by achim1
  0

• Velocity measurement: attribute error 'QTabWidget' object has no attribute 'pulseextractor'.

  #41 opened 9 years ago by aschulzdesy
  1

• Should Muonic use the matplotlibrc of the user or its own style?

  #48 opened 9 years ago by hpbretz
  3

• Muonic doesn't start on SL6 with matplotlib 1.4.2

  #47 opened 9 years ago by hpbretz
  2

• 'warning: 2D hist input should be....' when starting muoinc

  #40 opened 9 years ago by aschulzdesy
  2