adafruit/Adafruit-MLX90614-Library
Arduino library for the MLX90614 sensors in the Adafruit shop
C++NOASSERTION
Issues
- 4
Reading raw values is not possible
#46 opened by hacknus - 0
Sleep Mode for 3.3V version
#34 opened by abres33 - 7
- 3
- 12
MLX90614 reports large negative values (ie -178 celsius) after setting emissivity
#32 opened by dmalawey - 1
multiple sensors with different addresses
#37 opened by rvxfahim - 2
thermopile sensor MLX90614 Using different IO-pins as the standard I2C-IO-pins
#42 opened by StefanL38 - 0
Wrong Readings
#41 opened by LucasSchneiderRS - 4
MLX90614 I2C communications on Arduino Nano Every using Wire.h and Adafruit library
#30 opened by Nolan-Walker - 3
Return NaN if reading failed
#28 opened by szerwi - 5
Compatibility with Arduino Due
#25 opened by LEBsci - 2
Always returns true?
#24 opened by jhihn - 1
Link is wrong
#23 opened by jhihn - 6
- 1
- 4
EEPROM registers address
#11 opened by pcremades - 2
Why is the MLX90614 Datasheet Measurement Resolution 0.02 C but in after I try, it can be 0.01 C?
#21 opened by jake-winson - 1
Using different I2C buses
#14 opened by mhmayyan - 6
arduino nano every, Wire, and MLX90614
#9 opened by EdgeEdx - 6
M5StickC NCIR Hat has SDA 0, SCL 26. But the defualt SDA(32) and SCL(33) cannot be changed.
#17 opened by iotmaker-cc - 1
MLX90614 Sensor is giving different output (temperature) at a same distance so please tell us the calibration process
#16 opened by pravindeshmane - 2
not workin
#15 opened by hdihd9162 - 1
stm32 support?
#8 opened by paulporto - 2
- 1