adafruit/Adafruit_BNO08x

Issues

• Need interrupt pin for I2C

  #34 opened a month ago by aaronw2
  1

• Some questions about BNO08x

  #33 opened a month ago by brightproject
  1

• Cannot create more than one instance

  #32 opened 3 months ago by dhalbert
  4

• Support multiple sensors

  #4 opened 4 years ago by caternuson
  20

• Debug println still in Adafruit_BNO08x::begin_I2C?

  #31 opened 4 months ago by sentient-cloud
  0

• Any way to configure reports?

  #30 opened 5 months ago by jonrichings
  0

• hardwareReset() Not defined

  #29 opened 5 months ago by DSaiviswas
  0

• Tare function for the BNO085 chips

  #23 opened a year ago by TheJayOli
  3

• getSensorEvent never returns false

  #28 opened 7 months ago by Nicki297
  0

• RAW reports are causing reset if called without other reports enabled.

  #27 opened 9 months ago by wbadry
  0

• Arduino pro mini doesnt have sufficient storage space

  #26 opened 9 months ago by LordMax2
  0

• Timestamp problems

  #22 opened a year ago by joshgalvan
  5

• Avr/io.h: No such file or directory error when using Adafruit BNO08x library in PlatformIO

  #25 opened 9 months ago by ahmettarhan
  0

• Possible solution to BNO08x not running on plain ESP32

  #18 opened 2 years ago by norbinz
  11

• Lots of warns now errors with latest ESP32 BSP

  #19 opened 2 years ago by caternuson
  1

• Is the Host interrupt from BNO anywhere acknowledged in the SHTP or ADAFRUIT LIBRARIES of this repo???

  #17 opened 3 years ago by shivaprasad437
  1

• BNO085 gyro cal (example sketch 'quarternion_yaw_pitch_roll')

  #15 opened 3 years ago by SteveDillon123
  1

• Possible reduced wiring requirements for SPI mode

  #9 opened 3 years ago by kdharbert
  2

• Clearly there are multiple issues in this library with static declarations regardless of protocol or board "out of the box" . Bummer.

  #11 opened 4 years ago by grjohn14
  1

• using UART

  #8 opened 4 years ago by jerabaul29
  1

• setting output rate

  #7 opened 4 years ago by jerabaul29
  5

• Update RESET pin in examples for I2C scenario?

  #5 opened 4 years ago by caternuson
  5

• I2C not working on some boards

  #2 opened 4 years ago by caternuson
  16