adafruit/Adafruit_CircuitPython_PN532
CircuitPython driver for the PN532 NFC/RFID Breakout and PN532 NFC/RFID Shield
PythonMIT
Issues
- 1
Example using interrupt
#67 opened by samzmann - 4
- 1
Missing Type Annotations
#48 opened by FoamyGuy - 0
Additional RTD documentation needed
#56 opened by tekktrik - 2
Cannot found mifare card using UART
#46 opened by Walkline80 - 7
Using serial with the FTDI cable causes the library to hang when a card is read
#58 opened by AnasMalas - 0
get_passive_target is asking for more data from the UART than is provided, so we are blocking
#44 opened by infrastructure-ninja - 15
- 1
Faster way to detect when a card disconnects
#50 opened by dimpolo - 5
How can I make read_passive_target wait indefinitely until a tag becomes available?
#43 opened by xetum - 0
Reading Encrypted card error
#60 opened by cookie196 - 0
Products link broken in documentation
#55 opened by tekktrik - 1
- 0
- 8
Authenticate with card key
#20 opened by MikeDabrowski - 16
Response checksum did not match expected value
#13 opened by Taewan-P - 1
I2C delays slowing down code
#39 opened by dunkmann00 - 7
- 3
Add support to 'listen' for tags
#36 opened by dunkmann00 - 3
IRQ not used?
#35 opened by dunkmann00 - 2
- 5
Add @property style access
#7 opened by caternuson - 0
- 2
- 4
- 2
- 0
- 1
print method failure in pn532_simpletest.py
#15 opened by Tasm-Devil - 2
pn532_simpletest.py - UART - busio.UART not supported on this platform. Please use pyserial instead.
#12 opened by chuenniger - 7
Module not found
#8 opened by D37R4C7 - 23
MemoryError: memory allocation failed
#3 opened by andreykats - 3
incorrect import path for examples
#4 opened by caternuson