Logfile won't be generate data。

[Yxini]

hi！
I modified the "/etc/default/hd idle" file.
nano /etc/default/hd-idle
The following content has been modified:
START_HD_IDLE=true
HD_IDLE_OPTS="-i 0 -c ata -a /dev/disk/by-id/ata-TOSHIBA_DT01ACA100_55746MGRS -i 300 -l /var/log/hd-idle.log"
Then, I restarted the service.
systemctl restart hd-idle.service
and then i waited for five minutes and saw that the hard drive was sleeping normally. But it was found that there was no data in the log file.

[adelolmo]

Could you please check the documentation and let me know if it helps? https://github.com/adelolmo/hd-idle#log-file

…

On 28 November 2023 09:32:04 CET, Yxini ***@***.***> wrote: hi！ I modified the "/etc/default/hd idle" file. `nano /etc/default/hd-idle` The following content has been modified: `START_HD_IDLE=true` `HD_IDLE_OPTS="-i 0 -c ata -a /dev/disk/by-id/ata-TOSHIBA_DT01ACA100_55746MGRS -i 300 -l /var/log/hd-idle.log"` Then, I restarted the service. `systemctl restart hd-idle.service` and then i waited for five minutes and saw that the hard drive was sleeping normally. But it was found that there was no data in the log file.   -- Reply to this email directly or view it on GitHub: #109 You are receiving this because you are subscribed to this thread. Message ID: ***@***.***>

[Yxini]

oh，thankyou。
The next day, I saw that the file had generated data.
It seems that I misunderstood the way the file was generated.

[Yxini]

I have another question, which is that I have a device that uses USB to convert to Sata. Due to this particularity, I want the hard drive to not be completely dormant and reduce the speed (similar to Seagate's idle_c). May I ask if there is a way to do it.

[adelolmo]

Speed reduction is not supported.

…

On 29 November 2023 02:27:41 CET, Yxini ***@***.***> wrote: I have another question, which is that I have a device that uses USB to convert to Sata. Due to this particularity, I want the hard drive to not be completely dormant and reduce the speed (similar to Seagate's idle_c). May I ask if there is a way to do it. -- Reply to this email directly or view it on GitHub: #109 (comment) You are receiving this because you commented. Message ID: ***@***.***>

[Yxini]

Okay, thank you for your reply！