/ru102py

The example project for Redis University's RU102PY course.

Primary LanguagePythonMIT LicenseMIT

RediSolar Python

This is the sample application codebase for the Redis University course RU102PY, Redis for Python Developers.

Setup

Preview of running application - Solar Site Map with markers

Prerequisites

To start and run this application, you will need:

  • Python 3.8 (Note: It must be version 3.8). We suggest using pyenv to manage multiple versions of Python
  • Access to a local or remote installation of Redis version 5 or newer
  • Your Redis installation should have the RedisTimeSeries module installed. You can find the installation instructions at: https://oss.redis.com/redistimeseries/#setup

Note: If you don't have Redis installed but do have Docker or Podman and want to get started quickly, run make timeseries-docker or make timeseries-podman. This starts a Redis container with RedisTimeSeries installed. (Podman is a Docker replacement for Fedora users.)

If you're using Windows, check out the following resources for help with running Redis:

Setting up Python dependencies with make

This project automates setting up its Python dependencies with make.

To get started, run make env. This command creates a virtual environment and installs the project and its dependencies into the environment.

Setting up dependencies manually

Follow the steps in this section if you want to manually set up the project.

Note that the Makefile provides targets (e.g. make all, make backend_dev, and make frontend_dev) that automate everything you should need to do, so manually setting up the project is not necessary.

Virtualenv

If you want to create a virtualenv manually instead of using make env, run the following command from the base directory of the project:

python3.8 -m venv env

Dependencies

Before installing dependencies, activate the virtualenv:

source env/bin/activate

Install the app and its dependencies by running the following commands from the base directory of the project:

pip install --upgrade pip
pip install wheel pip-tools -e .
pip-sync requirements.txt requirements-dev.txt

Redis

This project requires a connection to Redis. The default settings expect Redis to run on localhost at port 6379 without password protection.

RedisTimeSeries

This project uses the RedisTimeSeries module. You can either install it manually or run Redis with the module enabled using Docker.

Check the project's web site for installation instructions: https://oss.redis.com/redistimeseries/

Note: As mentioned earlier in this document, if you have Docker installed and want to get started quickly, run make timeseries-docker, which starts a Docker container running Redis with the RedisTimeSeries module enabled.

Username and password protection

If you use Redis with a username (via the new ACL system in Redis 6) and/or a password, make sure to set the REDISOLAR_REDIS_USERNAME and/or REDISOLAR_REDIS_PASSWORD environment variables before running project-related make commands or manual commands.

You can set these on the command line like so:

$ REDISOLAR_REDIS_USERNAME=your-username make load

However, doing so keeps a record of these variables around in your shell history.

The example project is configured to read environment variables from a .env file, so if you do need to use environment variables, we recommend adding them to this file.

Note: The .env file is ignored by git because we added it to the .gitignore file. If you use a .env file, you should avoid adding it to git, so your credentials don't end up in git's history.

Finally, credential management is a big topic. This is just a demo project -- make sure you follow your company's guidelines for credentials management.

Using a different hostname and/or port for Redis

Important note: If you are not using Redis on localhost at port 6379, you need to update the following files:

  • redisolar/instance/dev.cfg
  • redisolar/instance/testing.cfg

In the referenced files, change the values of REDIS_HOST and REDIS_PORT to the correct values for your Redis instance.

Key prefixes

This project prefixes all keys with a string. By default, the dev server and sample data loader use the prefix "ru102py-app:", while the test suite uses "ru102py-test:".

When you run the tests, they add keys to the same Redis database that the running Flask application uses, but with the prefix "test:". Then when the tests finish, the test runner deletes all the keys prefixed with "test:".

You can change the prefix used for keys by changing the REDIS_KEY_PREFIX option in the following files:

  • redisolar/instance/dev.cfg
  • redisolar/instance/testing.cfg

Loading sample data

Before the example app will do anything interesting, it needs data.

You can use the command make load to load solar sites and generate example readings. make load loads data into the Redis instance that you configured in redisolar/instance/dev.cfg, using the REDIS_HOST and REDIS_PORT defined there.

Note: Read through the "Redis" section in this README to make sure you've properly configured the sample application to connect to Redis before you load sample data.

Running the dev server

Run the development server with make dev.

Note: By default, the server runs with geographic features disabled. To run with geo features enabled, set the option USE_GEO_SITE_API in redisolar/instance/dev.cfg to True.

After running make dev access http://localhost:8081 to see the app.

Don't see any data? The first time you run make dev, you may see a map with nothing on it. In order to see sites on the map, you'll need to do two things:

  1. Follow the instructions in this README to load data
  2. Complete Challenge #1 in the course

Running the dev server manually

If you need to override command-line flags when running Flask, you can use the flask command to run the dev server manually.

To do, first activate the project's virtual environment:

$ source env/bin/activate

Then run the flask command:

$ FLASK_APP=redisolar flask run --port=8001

Running tests

You can run make test to run the unit tests. Doing so will build a virtualenv automatically if you have not already done so.

Running tests manually

You can run individual tests by calling pytest manually. To do, first activate the project's virtual environment:

$ source env/bin/activate

Then run pytest with whatever options you want. For example, here is how you run a specific test:

$ pytest -k test_set_get

Optional (but Recommended): RedisInsight

RedisInsight is a graphical tool for viewing data in Redis and managing Redis server instances. You don't need to install it to be successful with this course, but we recommend it as a good way of viewing data stored in Redis.

To use RedisInsight, you'll need to download it then point it at your Redis instance. Check out the RedisInsight documentation for help.

FAQ

Why do I get a "Python 3.8 is not installed!" error when I try to run make commands?

This project requires Python 3.8. See the "Prerequisites" section of this README. You will need to install Python 3.8 on your machine, or else use our "lab" Docker image -- see the "Setup" tab in the course for more details.

Why do I get a ConnectionError when I run the tests or dev server?

You might see an error like this (or many of them) when you try to run the tests:

ERROR tests/scripts/test_update_if_lowest.py::test_update_if_lowest_unchanged - redis.exceptions.ConnectionError: Error 61 connecting to localhost:6379. Connection refused.

The error is telling you that Redis is not running on port 6379. Make sure you've started Redis -- exactly how to do so depends on your operation system and the way you installed Redis. For example, if you installed via Homebrew on a Mac, the command is:

brew services start redis

Why do I get an "Authentication required" error when I try to run the tests/dev server?

Your Redis instance requires a username and/or password to connect. First, find out what those are. Then follow the "Username and password protection" section of this README to configure the project to connect with those credentials.

Why do I get an "unknown command TS.ADD" when I try to run the tests?

Your Redis instance does not have the RedisTimeSeries module installed. See the section "RedisTimeSeries" in this README for instructions.

Questions?

Chat with our teaching assistants on the Redis University Discord Server.

Subscribe to our YouTube Channel / Follow us on Twitch

We'd love for you to check out our YouTube channel, and subscribe if you want to see more Redis videos! We also stream regularly on our Twitch.tv channel - follow us to be notified when we're live or check out our streaming schedule.

License

This project is released under the MIT license. See LICENSE for the full text.