An Internet of Things Agent for a JSON based protocol (with AMQP, HTTP and MQTT transports). This IoT Agent is designed to be a bridge between JSON and the NGSI interface of a context broker.
It is based on the IoT Agent Node.js Library. Further general information about the FIWARE IoT Agents framework, its architecture and the common interaction model can be found in the library's GitHub repository.
This project is part of FIWARE. For more information check the FIWARE Catalogue entry for the IoT Agents.
📚 Documentation | 🎓 Academy | 🐳 Docker Hub | 🎯 Roadmap |
---|
This IoT Agent is designed to be a bridge between an MQTT/HTTP+JSON based protocol and the FIWARE NGSI standard used in FIWARE. This project is based in the Node.js IoT Agent library. More information about the IoT Agents can be found within the library's GitHub repository.
A quick way to get started is to read the Step by step Manual.
As is the case in any IoT Agent, this one follows the interaction model defined in the Node.js IoT Agent Library, that is used for the implementation of the Northbound APIs. Information about the IoTAgent's architecture can be found on that global repository. This documentation will only address those features and characteristics that are particular to the JSON IoTAgent.
If you want to contribute to the project, check out the Development section and the Contribution guidelines.
Additional information about operating the component can be found in the Operations: logs and alarms document.
Information about how to install the JSON IoTAgent can be found at the corresponding section of the Installation & Administration Guide.
A Dockerfile
is also available for your use - further information can be found here
Information about how to use the IoT Agent can be found in the User & Programmers Manual.
The following features are listed as deprecated.
Apiary reference for the Configuration API can be found here More information about IoT Agents and their APIs can be found in the IoT Agent Library documentation.
The latest IoT Agent for JSON documentation is also available on ReadtheDocs
The JSON IoT Agent comes with a client that can be used to test its features, simulating a device. The client can be executed with the following command:
bin/iotaJsonTester.js
This will show a prompt where commands can be issued to the MQTT broker. For a
list of the currently available commands type help
.
The client loads a global configuration used for all the commands, containing
the host and port of the MQTT broker and the API Key and Device ID of the device
to simulate. This information can be changed with the config
command.
In order to use any of the MQTT commands, you have to connect to the MQTT broker first. If no connection is available, MQTT commands will show an error message reminding you to connect.
The Command Line Client gets its default values from a config file in the root
of the project: client-config.js
. This config file can be used to permanently
tune the MQTT broker parameters, or the default device ID and APIKey.
Mocha Test Runner + Should.js Assertion Library.
The test environment is preconfigured to run BDD testing style.
Module mocking during testing can be done with proxyquire
To run tests, type
npm test
All the tests are designed to test end to end scenarios, and there are some requirements for its current execution:
- Mosquitto v1.3.5 server running
- MongoDB v3.x server running
The IoT Agent for JSON is licensed under Affero General Public License (GPL) version 3.
© 2019 Telefonica Investigación y Desarrollo, S.A.U
There is absolutely no problem in using a product licensed under AGPL 3.0. Issues with GPL (or AGPL) licenses are mostly related with the fact that different people assign different interpretations on the meaning of the term “derivate work” used in these licenses. Due to this, some people believe that there is a risk in just using software under GPL or AGPL licenses (even without modifying it).
For the avoidance of doubt, the owners of this software licensed under an AGPL-3.0 license
wish to make a clarifying public statement as follows:
Please note that software derived as a result of modifying the source code of this software in order to fix a bug or incorporate enhancements is considered a derivative work of the product. Software that merely uses or aggregates (i.e. links to) an otherwise unmodified version of existing software is not considered a derivative work, and therefore it does not need to be released as under the same license, or even released as open source.