Kit is from Magic Phoenix.
Voron 2.4 R2 Customized Kit
Category | Selection |
---|---|
Size | 300mm |
Volt | 220V |
Frame | Misumi Black Frame (Pre drilled/cutted) |
Fasteners | Stainless Steel Fasteners Kit |
Belt | Gates EPDM Belt |
Pulleys & Idlers | Gates |
X Linear Rail | HIWIN MGN12H Z1PM |
Y/Z Linear Rails | MagicPhoenix 440C Stainless Steel MGN9H x6 |
Steppers | LDO X/Y/Z Steppers |
Controller | I'll order it separately. |
Board | Bigtreetech Octopus Pro F446 |
Stepper Drivers | Bigtreetech TMC2209 x7 |
Display | Bigtreetech Mini12864 |
Other Electronics | GDSTime Dual Bearings Fans, Meanwell LRS-200-24 , Meanwell RS-25-5, Omron G3NB-210B-1 |
Probe | Klicky [pre-assembly with PA12 Printed Parts] |
Toolhead | Stealthburner[Beta] |
Toolhead Heater & Thermistor | 50W Heater & PT100 |
Toolhead Extruder BMG Gears | MagicPhoenix Ultra-wear |
Toolhead Extruder Stepper | LDO High-Temp Stepper |
Toolhead Fan | GDSTime Dual Bearings Fan |
Hotend | Phaetus Dragon Hotend Voron Edition Standard Flow |
Wiring | Pre-made wires with Canbus Toolboard |
Panels | PC PANELS(Black and Clear) |
Buildplate | MagicPhoenix 5083 Cast Aluminium Buildplate |
Heater | Unique Prints Keenevo bed |
PEI | Double Sided Textured PEI Spring Steel |
All of the configuration and database files for Voron 2.4R2.
Note that backup.sh is saved locally due to personal access token information being stored in it.
Manual backups of the SuperSlicer config folder for profiles etc
-
Rework back panel mod to have dual entry https://mods.vorondesign.com/detail/JpyUj2eynCA10xcD4UEdow
-
Adjust the bedpan wago mount to cover the cables