ajay75/hashicorp-stack-demoapp

HashiCorp Cloud Platform (Vault/Consul), Consul-Terraform-Sync, & Boundary with Datadog and Kubernetes

HashiCorp Demo Application with Boundary, Consul, & Vault on Kubernetes

This is a demo of using Boundary, Consul, and Vault to secure an application on Kubernetes.

Boundary controls user access to databases and test endpoints. Consul secures service-to-service communication. Vault secures the Consul cluster and issues temporary credentials for an application to access a database

• Navigation
• Prerequisites
• Setup
• Explore
• Clean Up
• Credits
• Additional References

Navigation

Each folder contains a few different configurations.

• Terraform Configurations

  • infrastructure/: All the infrastructure to run the system.

    • VPC (3 private subnets, 3 public subnets)
    • Boundary cluster (controllers, workers, and AWS RDS PostgreSQL database)
    • AWS Elastic Kubernetes Service cluster
    • AWS RDS (PostgreSQL) database for demo application
    • HashiCorp Virtual Network (peered to VPC)
    • HCP Consul
    • HCP Vault

  • vault/setup/: Deploy a Vault cluster via Helm chart and set up Kubernetes auth method

  • boundary: Configures Boundary with two projects, one for operations and the other for development teams.

  • certs/: Sets up offline root CA and signs intermediate CA in Vault for Consul-related certificates.

  • vault/consul/: Set up Consul-related secrets engines.

  • consul/setup/: Deploys a Consul cluster via Helm chart. For demonstration of Vault as a secrets backend, deploys Consul servers + clients.

  • consul/config/: Sets up external service to database.

  • vault/app/: Set up secrets engines for applications. Archived in favor of consul/cts/.

• Other

  • consul/cts/: Deploys CTS to Kubernetes for setting up Vault database secrets based on database service's address

  • application/: Deploys the HashiCorp Demo Application (AKA HashiCups) to Kubernetes

  • database/: Configures HashiCorp Demo Application database

Prerequisites

CLIs

Be sure to download the CLIs for the following.

• Terraform 1.4
• Consul 1.12 (on Kubernetes)
• Vault 1.10
• Boundary 0.8
• Kubernetes 1.22

Platforms

• Terraform Cloud
  • Create an account.
  • Download the Terraform CLI.
  • Log into Terraform Cloud from the CLI.
• AWS Account
  • Create an AWS EC2 keypair.
• HashiCorp Cloud Platform account
  • You need access to HCP Consul and Vault.
  • Create a service principal for the HCP Terraform provider.
• jq installed
• Fork this repository.

Setup

Bootstrap Terraform Cloud workspaces.

Start by setting up Terraform Cloud workspaces for all infrastructure. We divide the infrastructure provisioning from the deployment of services into separate states. This enforces a unidirectional dependency.

Before you start, make sure you:

• Create a Terraform Cloud account.
• Download the Terraform CLI.
• Log into Terraform Cloud from the CLI.

Go to the bootstrap directory.

cd bootstrap

Copy tfvars.example to terraform.auto.tfvars.

cp tfvars.example terraform.auto.tfvars

Update terraform.auto.tfvars with the required variables and credentials. DO NOT COMMIT THIS FILE AS IT CONTAINS CREDENTIALS.

Note: For the HashiCorp folks, use doormat to push credentials up to the Terraform Cloud workspaces individually and leave AWS credentials blank in terraform.auto.tfvars. The session tokens cannot be loaded into variable sets. Use the command doormat aws --account $AWS_ACCOUNT_ID tf-push --organization hashicorp-stack-demoapp --workspace infrastructure,boundary,consul-config,consul-setup,vault-setup.

vim terraform.auto.tfvars

Initialize Terraform.

terraform init

Run Terraform and enter "yes" to apply.

terraform apply

If you log into Terraform Cloud and navigate to the hashicorp-stack-demoapp organization, all the workspaces will be set up.

Next, set up all backends locally to point to Terraform Cloud. This demo needs access to output variables from specific workspaces in order to configure some things locally.

make terraform-init

Note: If you are using a different organization name other than hashicorp-stack-demoapp, update all backend.tf files to use the correct TFC organization.

Deploy infrastructure.

Note: When you run this, you might get the error Provider produced inconsistent final plan. This is because we're using default_tags. Re-run the plan and apply to resolve the error.

Go to the infrastructure workspace in Terraform Cloud.

Update the infrastructure/terraform.auto.tfvars file with your chosen region.

Commit it up to your fork.

Start a new plan and apply it. It can take more than 15 minutes to provision!

Configure Vault (Kubernetes Auth Method)

Go to the vault/setup workspace in Terraform Cloud.

Start a new plan and apply it.

Terraform will set up Kubernetes authentication method and deploy the Vault Helm chart to the cluster.

Configure Boundary

Go to the boundary workspace in Terraform Cloud.

Optionally, update the boundary/terraform.auto.tfvars file with a list of users and groups you'd like to add.

Commit it up to your fork.

Start a new plan and apply it. This creates an organization with two scopes:

• core_infra, which allows you to SSH into EKS nodes
• product_infra, which allows you to access the PostgreSQL database

Only product users will be able to access product_infra. operations users will be able to access both core_infra and product_infra.

Configure Offline Root CA for Consul

As a best practice, store root CAs away from Vault. To demonstrate this, we generate a root CA offline. We use three separate root CAs:

• Cluster Root CA

  • Level 1 Intermediate CA (server root)
  • Level 2 Intermediate CA (server intermediate)

• Service Mesh Root CA for mTLS: This requires three levels because we will need to reconfigure the CA for the correct SPIFFE URI.

  • Level 1 Intermediate CA
  • Level 2 Intermediate CA (service mesh root)
  • Level 3 Intermediate CA (service mesh intermediate)

• API Gateway Root CA

  • Level 1 Intermediate CA (gateway root)
  • Level 2 Intermediate CA (gateway intermediate)

NOTE: This is a local Terraform command in order to secure the offline root CA.

Run the command to create a root CA as well as the intermediate CAs, and store the intermediate CAs in Vault. Enter "yes" for Terraform to configure Vault PKI secrets engine and add a passphrase as required.

make configure-certs

Configure Vault for Consul (PKI Secrets Engine)

Go to the vault/consul workspace in Terraform Cloud.

Start a new plan and apply it.

Terraform will set up the PKI secrets engine for TLS in the Consul cluster (not the service mesh).

Configure Consul

Using kustomize, deploy the Gateway CRDs.

make configure-kubernetes

Go to the consul/setup workspace in Terraform Cloud.

Start a new plan and apply it. This deploys Consul clients and a terminating gateway via the Consul Helm chart to the EKS cluster to join the HCP Consul servers.

The Helm chart will get stuck because of this issue. Patch the API gateway to resolve.

make configure-api-gateway

Reconfigure Certificates with Consul Cluster ID

API Gateway requires a SPIFFE-compliant URI in the service mesh certificate. To bypass this issue, you will need to reconfigure the root CA with a SPIFFE URI that contains the correct Consul cluster ID.

make configure-certs-spiffe

This forces a root certificate rotation for Consul service mesh.

Configure Consul External Services & API Gateway

Update the terminating gateway with a write policy to the database.

make configure-terminating-gateway

Go to the consul/config workspace in Terraform Cloud.

Start a new plan and apply it. This does a few things, including:

• registers the database as an external service to Consul
• deploys the Consul API Gateway
• sets up the application intentions.

Add Coffee Data to Database

To add data, you need to log into the PostgreSQL database. However, it's on a private network. You need to use Boundary to proxy to the database.

1. Set up all the variables you need in your environment variables.

   source set_terminal.sh

2. Run the following commands to log in and load data into the products database.

   make configure-db

If you try to log in as a user of the products team, you can print out the tables.

make postgres-products

Configure Vault for Applications to Access Database

You can use Consul-Terraform-Sync to read the database address from Consul and automatically configure a database secrets engine in Vault using a Terraform module.

To do this, deploy CTS to Kubernetes.

make configure-cts

Deploy Example Application

To deploy the example application, run make configure-application.

You can check if everything by checking the pods in Kubernetes.

$ kubectl get pods

NAME                                                          READY   STATUS    RESTARTS   AGE
## omitted for clarity
frontend-5d7f97456b-2fznv                      2/2     Running   0          15m
nginx-59c9dbb9ff-j9xhc                         2/2     Running   0          15m
payments-67c89b9bc9-kbb9r                      2/2     Running   0          16m
product-55989bf685-ll5t7                       3/3     Running   0          5m5s
public-64ccfc4fc7-jd7v7                        2/2     Running   0          8m17s

Port forward the nginx service to http://localhost:8080.

kubectl port-forward svc/nginx 8080:80

You'll get a UI where you can order your coffee.

Set up a route to the frontend through the API Gateway

To set up a route on the API gateway, deploy an HTTPRoute.

make configure-route

Explore

To log into any of the machines in this demo, you'll need the SSH key.

make get-ssh

This will save the private SSH key into id_rsa.pem at the top level of this repository.

To use Boundary, use your terminal in the top level of this repository.

1. Set the BOUNDARY_ADDR environment variable to the Boundary endpoint.

   source set_terminal.sh

2. Use the example command in top-level Makefile to SSH to the EKS nodes as the operations team.

   make ssh-operations

3. Go to the Boundary UI and examine the "Sessions". You should get an active session in the Boundary list because you accessed the EKS node over SSH.

Clean Up

Delete applications.

make clean-application

Revoke Vault credentials for applications.

make clean-vault

Disable CTS task, remove resources, and delete CTS.

make clean-cts

Go into Terraform Cloud and destroy resources for the consul-config workspace.

Remove additional Consul resources.

make clean-consul

Go into Terraform Cloud and destroy resources for the consul-setup workspace.

Remove API Gateway manifests.

make clean-kubernetes

Go into Terraform Cloud and destroy resources for the vault-consul workspace.

Remove certificates for Consul from Vault.

make clean-certs

Go into Terraform Cloud and destroy resources for the vault-setup workspace.

Go into Terraform Cloud and destroy resources for the boundary workspace.

Go into Terraform Cloud and destroy resources for the infrastructure workspace.

Credits

• The demo application comes from the HashiCorp Demo Application.

Additional References

• portal.cloud.hashicorp.com/sign-up
• consul.io/docs/k8s/installation/vault
• vaultproject.io/docs/secrets/pki
• consul.io/docs/nia
• vaultproject.io/docs/auth/kubernetes
• consul.io/docs/security/acl/auth-methods/kubernetes
• hashi.co/k8s-vault-consul
• hashi.co/k8s-consul-api-gateway