This repository provides a collection of tools that enable automated testing of OpenPower systems. The op-test-framework suite is designed to test a machine largely out of band - that is, it is designed for tests that do things like power cycle the machine, test booting different configurations. As part of the op-test-framework, we may run tests on the host itself (such as fwts and HTX)
The end goal is to have a collection of tests that can be run against any OpenPower system to validate it's function. The tests are automation/jenkins ready.
This framework runs on most Linux based systems.
You need python 2.7 or greater and also needs below modules to be installed
pexpect, importlib, ptyprocess
You will also need below packages need to be installed
sshpass and (recent) ipmitool - 1.8.15 or above should be adequate.
You will need to run the test suite on a machine that has access to both the BMC and the host of the machine(s) you're testing.
The target system will need to have an OS that can boot. That OS will need to have several things installed on it.
A basic Linux install is assumed.
You MUST have fwts installed. To do this:
sudo apt-get install software-properties-common
sudo add-apt-repository ppa:firmware-testing-team/ppa-fwts-stable
sudo apt-get update
sudo apt-get install fwts
It must also have (package names for Debian/Ubuntu systems):
linux-tools-common linux-tools-generic lm-sensors ipmitool i2c-tools
pciutils opal-prd opal-utils device-tree-compiler
On RHEL-like systems, package names are:
lm_sensors ipmitool i2c-tools pciutils kernel-tools dtc
From skiboot, you will need the xscom-utils and gard installed:
git clone https://github.com/open-power/skiboot
cd skiboot/external/xscom-utils
make
sudo make install
cd ../gard
make
sudo make install
./op-test -h
Gets you help on what you can run. You will need to (at a minimum) provide BMC and host login information. For example, to run the default test suite:
./op-test --bmc-type AMI \
--bmc-ip bmc.example.com \
--bmc-username sysadmin \
--bmc-password superuser \
--bmc-usernameipmi ADMIN \
--bmc-passwordipmi admin \
--host-ip host.example.com \
--host-user root \
--host-password 1234 \
--host-lspci host.example.com-lspci.txt
The default test suite will then run.
To get a list of test suites:
./op-test --bmc-type AMI --list-suites
You cun run one or more suites by using the --run-suite command line option.
For example, you can choose to run tests that are only at the petitboot
command line. By default, the test runner doesn't know what state the machine
is in, so will attempt to turn everything off to get it into a known state.
You can override this initial state with the --machine-state parameter.
You can also run individual tests by using the --run option.
For example:
./op-test --bmc-type AMI \
--bmc-ip bmc.example.com \
--bmc-username sysadmin \
--bmc-password superuser \
--bmc-usernameipmi ADMIN \
--bmc-passwordipmi admin \
--host-ip host.example.com \
--host-user root \
--host-password 1234 \
--host-lspci host.example.com-lspci.txt \
--machine-state PETITBOOT_SHELL \
--run testcases.OpTestPCI.OpTestPCISkiroot
The above will assume the machine is sitting at the petitboot prompt and will run the OpTestPCISkiroot test.
You can save arguments to op-test in a configuration file.
The ~/.op-test-framework.conf file is always read, and you can
specify another with --config-file.
For example:
[op-test]
bmc_type=OpenBMC
bmc_ip=w39
bmc_username=root
bmc_password=0penBmc
host_ip=w39l
host_user=ubuntu
host_password=abc123
In addition to running tests, you can flash firmware before running
the tests. You can also only flash firmware (--only-flash).
./op-test --bmc-type FSP ........ \
--host-img-url http://example.com/images/firenze/b0628b_1726.861/SIGNED/01SV860_103_056.img \
--flash-skiboot ~/skiboot/skiboot.lid --flash-kernel zImage.epapr \
--flash-initramfs rootfs.cpio.xz
./op-test --bmc-type OpenBMC ........ \
--flash-skiboot ~/skiboot/skiboot.lid.xz
Flashing is BMC dependent, so new platforms may not support it.
The --host-img-url option for FSP systems uses update_flash from
the petitboot shell to update the firmware image. If additional --flash
options are given, these are flashed after the FSP firmware image.