5.1 surround sound speaker system with the amplifier built into the subwoofer and managed by an external control console attached using a DE-15 connector.
Provide unofficial documentation of the serial protocol and possible firmware/configuration modifications.
The console firmware can be modified to:
- Automatically turn the speakers on when power is supplied.
- Change the automatic standby idle timeout from the default 2 hours.
To enable/disable automatic standby, hold the "level" button for 5 seconds (until the level change light goes out). There's no obvious indication that anything has changed but the current effect will have been changed to the default for all inputs (check by turning the console off and on).
To get this into a known state (automatic standby enabled), hold down the "input" button for 8 seconds while in standby. This will reset all settings.
"Logitech" is a trademark of Logitech International SA.