al177/blinkencard

Issues

• Rotate the battery connector 180 degrees

  #13 opened a year ago by al177
  0

• Keep vias away from silk

  #8 opened a year ago by al177
  0

• v2.0 - Add polarity legends to the battery connector

  #11 opened a year ago by al177
  0

• v2.0 BOM errors

  #9 opened a year ago by al177
  0

• v2.0 - battery connector polarity is opposite the Adafruit standard

  #10 opened a year ago by al177
  0

• v2.0 - Increase silk text and line width on the front panel

  #12 opened a year ago by al177
  0

• More ground test points

  #6 opened 5 years ago by al177
  1

• Need test point for RESET

  #7 opened 5 years ago by al177
  1

• Reduce gnd via diameter

  #4 opened 5 years ago by al177
  1

• Cp2102N is too slow to bitbang the SPI flash

  #1 opened 5 years ago by al177
  1

• Don't use RGB pins for row drive

  #3 opened 5 years ago by al177
  1

• Packages for QFNs did not solder properly

  #2 opened 5 years ago by al177
  1

• Increase 0/1 button spacing to match L/R

  #5 opened 5 years ago by al177
  1