This is a repo that tries to summarize various efforts in reverse engineering the Sagemcom DTIW384 STB.
This device is used by many EU ISPs as a DVB-T2 decoder with internet and paytv capabilities.
The device analyzed is the one sold by the french provider SFR called SFR STB7 Decoder Plus UHD.
The device has:
- 1 MicroSD slot
- 1 USB 3.0 Port
- 1 HDMI output
- 1 SPDIF output
- Reset button
- WPS button
- RJ45 Ethernet 10/100/1000
- WiFi Dual Band AC 3x3
- Bluetooth 4.0 (not sure about the version)
Item | Name | Main features |
---|---|---|
SoC | Broadcom BCM7252S | Dual-core ARM B15 |
eMMC | Samsung KLM4G1FEPD | 4 GiB storage |
Flash | Macronix MX25L3254EXDI-10G | 32 Mbit NOR Flash |
Decoder | Sony CXD2837ER | DVB-T/T2 decoder |
Running nmap shows:
PORT STATE SERVICE
7000/tcp closed afs3-fileserver
9080/tcp open glrpc
49152/tcp open unknown
49153/tcp open unknown
Test points were found on the bottom of the device and were accessible from the outside. I was able to almost get the pinout (I'm not sure about the RX...). Serial Boot dump is available in the capture folder.