A 3D Printable Pen Plotter Toolhead for the Creality Ender 3 3D Printer
Originally launched as a product on Tindie, I've since decided to release it for free! If you still want to support this project, you can buy me a coffee on Ko-Fi!
The pltr v2 is a 3D printed pen plotter toolhead that is designed to mount on the Creality Ender 3 Pro and Creality Ender 3 V2 3D printers. Installing the pltr is simple, and only requires three flathead bolts to attach to your printer.
The User Guide .PDF contains all of the information you should need to get starter with your pltr toolhead. Once the pltr toolhead has been installed, you can use the included .gcode files to calibrate your machine.
You can also find the full build instructions on YouTube: https://youtu.be/c1Wo9KkZKNQ
pltr.calibration.mp4
- 2x M3x40 Bolt
- 2x M3 Locking Nut
- 3x M3x10 Flathead Bolt
- 4x M4x15 Mushroom Cap Bolt
- 2x Springs
- 4x Binder Clips
- 1x 2mm Allen Key
- 1x 2.5mm Allen Key
The pltr has four mounting points: two fixed and two spring-loaded, so you can experiment with a wide variety of writing implements, pens, brushes, and more!
Designed and manufactured in Charlotte, North Carolina using GreenGate3D recycled PETG.
Read about the pltr v2 on 3DWithUs.