Pure javascript NMEA 2000 decoder and encoder
Canboatjs is a port of the canboat project (https://github.com/canboat/canboat) to javascript and it is intended to be used with the Signal K Node Server
Canboajs js is built on the backs of a few people whithout whom it would not be possible.
- Kees Verruijt kees@verruijt.net
- Jouni Hartikainen jouni.hartikainen@iki.fi
- Teppo Kurki teppo.kurki@iki.fi
- Read directly from an Actisense NGT-1
- Read from a canbus using socketcan
- Supports input in canboat analyzer json format
- Take input in canboat analyzer json format and convert to binary N2K format and output to the NGT-1 or canbus
The details about the PGN's recognized by Canboatjs come from the canboat project in pgns.json. If you want to add or update PGN details, please make changes to the pgn.h file in canboat and submit a pull request there. Include sample data and raise an issue here so that I can include your changes in Canboatjs.
This program is similar to the canboat analyzer command-line. It takes input in the actisense serial format and outputs canboat json for mat.
This program takes input in the canboat json format and outputs actisense serial format.
This program takes input in the candump format and outputs canboat json format
You can use the admin ui to use canbusjs with an Actisense NTG-1. Add a new provider, make the input type "NMEA 2000" and select "Actisense NGT-1 (pure js, experimental)" for the "NMEA 2000 Source".
To configure in the settings file manually, add the following to your pipedProviders and fill in the correct usb device.
{
"id": "actisense-canboatjs",
"pipeElements": [
{
"type": "providers/actisense-serial",
"options": {
"device": "/dev/ttyUSB0"
}
},
{
"type": "providers/canboatjs"
},
{
"type": "providers/n2k-signalk",
}
],
"enabled": true
},
Current the only way to configure for canbus is to manually edit your settings file.
{
"id": "canbus-canboatjse",
"enabled": true,
"pipeElements": [
{
"type": "providers/canbus",
"options": {
"canDevice": "can0"
}
},
{
"type": "providers/canboatjs"
},
{
"type": "providers/n2k-signalk"
}
]
}
You can send out N2K PGNs from server plugins by emiting 'nmea2000out' to the app object in either actisense serial format or analizer json format. Please note that the signalk-to-nmea2000 plugin can convert many things in Signal K to N2K and automatically output via Canboatjs.
const pgn = {
pgn: 130306,
'Wind Speed': speed,
'Wind Angle': angle < 0 ? angle + Math.PI*2 : angle,
'Reference': "Apparent"
}
app.emit('nmea2000out', pgn)
The canbus provider participates correctly in the SAE J1939 Address Claim Procedure. This means the your canbus device will get a correct canbus address and register with and be recognized by other N2K devices on the network.
By default it attempts to register using address 100, but will adjust accourdingly if there is another device on the network with the same address. If there are issues with that process, you can configure Canboatjs to default to a different address by setting the preferedAddress option:
{
"id": "canbus-canboatjse",
"enabled": true,
"pipeElements": [
{
"type": "providers/canbus",
"options": {
"canDevice": "can0",
"preferredAddress": 7
}
},
{
"type": "providers/canboatjs"
},
{
"type": "providers/n2k-signalk"
}
]
}
Canboatjs also responds to an ISO Request for PGN 126464, which is a request to find out which PGNs the device transmits. It currently defaults with PGNs supported internally and the PGNs supported by signalk-to-nmea2000. You can add to this list by providing the transmitPGNs option:
{
"id": "canbus-canboatjse",
"enabled": true,
"pipeElements": [
{
"type": "providers/canbus",
"options": {
"canDevice": "can0",
"transmitPGNs": [ 123456, 123457 ]
}
},
{
"type": "providers/canboatjs"
},
{
"type": "providers/n2k-signalk"
}
]
}