Overview ======== This document highlights the steps to compile Linux device driver test cases for A32. Steps to compile using bitbake ============================== 1. Create Bolt Linux build project using the steps mentioned in http://10.10.10.22:8081/doku.php?id=build_linux_kernel_rootfs_bolt_asic_rev_a0. 2. Once the project is created either using bolt-firmware-5.4 scripts or build release tarball, run the following command to set the environment. $ source setup.sh 3. Build a32-linux-dd-testcases recipe using bitbake. $ bitbake a32-linux-dd-testcases 4. The compiled test cases can be found at tmp/work/cortexa32-neon-poky-linux-musleabi/a32-linux-dd-testcases/1.0-r6/image/ directory. Note: By default the a32-linux-dd-testcases package will be part of alif-tiny-image rootfs, and the pre-compiled binaries can be found under /opt/linux_dd_test/ directory. Steps to compile using toolchain/SDK installer ============================================== 1. Fetch the SDK installer (.sh) file from the following link. Link: http://10.10.10.21/userContent/latest/Bolt_ASIC_Rev_A0_Linux_Application_Core/sdk/ OR Build SDK installer using the bitbake using http://10.10.10.22:8081/doku.php?id=build_linux_kernel_rootfs_bolt_asic_rev_a0#f_build_toolchain_installer_using_bitbake 2. Install the SDK installer. Example: $ tmp/deploy/sdk/bolt-tiny-musl-x86_64-alif-tiny-image-cortexa32-neon-bolt-rev-a0-toolchain-0.1.sh Alif Iota - Tiny Linux Distribution SDK installer version 0.1 ============================================================= Enter target directory for SDK (default: /opt/bolt-tiny/0.1): $PWD/bolt-tiny/0.1 You are about to install the SDK to "/var/lib/jenkins/Bolt-Rev_A0_daily/bolt-firmware-5.4/build/bolt-tiny/0.1". Proceed [Y/n]? y Extracting SDK......................................done Setting it up...done SDK has been successfully set up and is ready to be used. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g. $ . /var/lib/jenkins/Bolt-Rev_A0_daily/bolt-firmware-5.4/build/bolt-tiny/0.1/environment-setup-cortexa32-neon-poky-linux-musleabi 3. Setup the environment variables. $ source /var/lib/jenkins/Bolt-Rev_A0_daily/bolt-firmware-5.4/build/bolt-tiny/0.1/environment-setup-cortexa32-neon-poky-linux-musleabi 4. Change to a32_linux_DD_testcases directory and run 'make' to build binaries. The binaries are built under respective test case directories. $ cd a32_linux_DD_testcases $ make 5. To clean built binaries and object files run below command. $ make TARGET=clean 6. To install all binaries under 'image' directory run below command. $ make TARGET=install Steps to add testcases ====================== The additional test cases can be added by following the below steps. 1. Create a new test name directory under testcases directory. Example: $ cd testcases $ mkdir -p i2c 2. Create a C testcase source file. 3. Create include directory and add optional needed ".h" files into it. 4. Copy the testcases/mhu/Makefile into the newly created test name directory. Example: $ cp testcases/mhu/Makefile testcases/i2c/ 5. The top level Makefile compiles ".c" files under newly created test name directory.
alifsemi/alif_a32_linux_DD_testcases
Contains userspace Linux device driver test cases for Alif Semiconductor Ensemble devices.
CNOASSERTION