altLab/photon-resin-calibration

Issues

• Unknown file type error on Elegoo Mars Pro

  #27 opened 4 years ago by Cheaternl
  4

• Calibration test for fast LCDs

  #26 opened 4 years ago by rezjat
  4

• How to use on different printers

  #22 opened 5 years ago by Serray
  8

• Can't run .gcode on Photon

  #25 opened 4 years ago by drunk-0ctopus
  2

• test-mode.gcode file does not run on Photon

  #24 opened 4 years ago by davidelrizzo
  0

• Photon S?

  #23 opened 4 years ago by flome00
  1

• Template only finding header info

  #21 opened 5 years ago by ForceFedDSM
  3

• Qidi Tech Shadow 5.5 S support

  #20 opened 5 years ago by DrMcCoy
  0

• Mention that it does not work on transparent resin on front page

  #16 opened 5 years ago by DavoudTaghawiNejad
  3

• PhotonS Support

  #18 opened 5 years ago by Teifun2
  2

• Broken link

  #17 opened 5 years ago by stenci
  1

• Is the print-mode.gcode exactly the same as in Firmware 4.2.19?

  #15 opened 5 years ago by lilalinux
  3

• Question about different layer exposure times

  #14 opened 5 years ago by toluse
  0

• The template doesn't work on the new .photon files

  #11 opened 5 years ago by lagnajeet
  1

• wrong thickness ?

  #10 opened 5 years ago by script-kitty
  3

• Photon-S support

  #9 opened 5 years ago by gentlecolts
  2

• File extention problem on ameratown_peopoly_50u_8xB80_15.photon.photon

  #6 opened 6 years ago by electronickslab
  0

• No issue, just a request: 100u

  #4 opened 6 years ago by ZappoB
  3

• wrong exposure time in 1-100 photon file

  #3 opened 6 years ago by valentt
  3

• Meaning of 'Unknown 3/4/5'

  #2 opened 6 years ago by NardJ
  2

• Link for forum / source of gcode

  #1 opened 6 years ago by bekriebel
  2