About

This Powershell module contains a collection of functions gathered from an assortment of scripts I use to automate SCCM software distribution. After spending way too many hours cutting and pasting from old scripts in order to automate a new task, I decided I needed to aggregate all of the bits of code from my collection of scripts into a reusable kit. This is the result of that decision.

Please conduct your own independent testing before trusting this code in a production environment. This module has only been tested with SCCM 2007.

These are the available commands:

Site Commands

Add-SCCMComputerToCollection
Add-SCCMPackageToDistributionPoint
Clear-SCCMLastPxeAdvertisement
Get-SCCMAdvertisement
Get-SCCMAdvertisementAssignedSchedule
Get-SCCMAdvertisementsForCollection
Get-SCCMAdvertisementsForComputer
Get-SCCMAdvertisementsForPackage
Get-SCCMAdvertisementStatusForComputer
Get-SCCMCollection
Get-SCCMCollectionMembers
Get-SCCMCollectionRefreshSchedule
Get-SCCMCollectionsForComputer
Get-SCCMCollectionVariables
Get-SCCMComputer
Get-SCCMComputerVariables
Get-SCCMDistributionPoints
Get-SCCMFolder
Get-SCCMMaintenanceWindows
Get-SCCMMaintenanceWindowSchedules
Get-SCCMPackage
Get-SCCMProgram
Get-SCCMProgramSupportedPlatforms
Get-SCCMSiteCode
Get-SCCMSiteProvider
Get-SCCMSupportedPlatforms
Move-SCCMAdvertisementToFolder
Move-SCCMFolder
Move-SCCMPackageToFolder
New-SCCMAdvertisement
New-SCCMCollectionVariable
New-SCCMComputer
New-SCCMComputerVariable
New-SCCMFolder
New-SCCMMaintenanceWindow
New-SCCMNonRecurringScheduleToken
New-SCCMPackage
New-SCCMProgram
New-SCCMRecurIntervalScheduleToken
New-SCCMRecurMonthlyByDateScheduleToken
New-SCCMRecurMonthlyByWeekdayScheduleToken
New-SCCMRecurWeeklyScheduleToken
New-SCCMStaticCollection
New-SCCMSupportedPlatform
Remove-SCCMAdvertisement
Remove-SCCMCollection
Remove-SCCMComputer
Remove-SCCMComputerFromCollection
Remove-SCCMFolder
Remove-SCCMPackage
Remove-SCCMPackageFromDistributionPoint
Remove-SCCMProgram
Save-SCCMAdvertisement
Save-SCCMCollection
Save-SCCMFolder
Save-SCCMPackage
Save-SCCMProgram
Set-SCCMAdvertisementAssignedSchedule
Set-SCCMCollectionMaintenanceWindows
Set-SCCMCollectionRefreshSchedule
Set-SCCMCollectionVariables
Set-SCCMComputerVariables
Set-SCCMProgramSupportedPlatforms

Client Commands

Get-SCCMClientAdvertisementScheduleId
Get-SCCMClientAssignedSite
Get-SCCMClientCacheSize
Get-SCCMClientSoftwareDistributionHistory 
Invoke-SCCMClientAction
Invoke-SCCMClientSchedule
Set-SCCMClientAssignedSite
Set-SCCMClientCacheSize

Utility Commands

Convert-DateToSCCMDate
Convert-SCCMDateToDate

Installation

You will need to have Powershell V3 installed. If you don't already have it, you can download it here:

http://www.microsoft.com/en-us/download/details.aspx?id=34595

Make sure the following directory exists and is part of your PSModulePath:

%userprofile%\Documents\WindowsPowershell\Modules

If you run the Install.ps1 script, it should copy the files to the right place for you. If the script fails to copy the files properly, you can do so manually by creating the directory:

%userprofile%\Documents\WindowsPowershell\Modules\SCCM

and copying the following files into it:

SCCM.psm1
SCCM.psd1
SCCM_Advertisement.psm1
SCCM_Client.psm1
SCCM_Collection.psm1
SCCM_Computer.psm1
SCCM_Folder.psm1
SCCM_Formats.ps1xml
SCCM_Package.psm1

Usage

Use the following line at the top of your scripts:

Import-Module SCCM

If the import is successful, you should be able to use all of the module's exported functions. To see a list of available functions, use:

Get-Help SCCM

Examples

Here's one example of something you can do with this module. Visit the Wiki to see a list with a few more examples.

A workflow for automated test package creation:

Create a new package
Create an installation program for the new package
Distribute it to distribution points
Create a collection in order to test this package
Add a computer to the test collection
Advertise the program to the test collection
Instruct the test computer to retrieve new machine policies

Here's how this can be accomplished:

Create a new package

 $newPackage = New-SCCMPackage `
                     -packageName $packageName `
                     -packageDescription $packageDescription `
                     -packageVersion $packageVersion `
                     -packageManufacturer $packageManufacturer `
                     -packageLanguage $packageLanguage `
                     -packageSource $packageSourcePath

The package will be created with default settings, but you can customize it further if you wish (usually by setting package flags). Look at this link for some more information about package flags and settings http://msdn.microsoft.com/en-us/library/cc144959.aspx. If you do make changes to the package, make sure to use Save-SCCMPackage when you're finished.

Create an installation program for the new package
```
 $newProgram = New-SCCMProgram `
                     -packageId $newPackage.PackageID `
                     -programName $programName `
                     -programCommandLine $programCommandLine
```
The program will be created with default settings, but you can customize it further if you wish (usually by setting program flags). Look at this link for some more information about program flags and settings http://msdn.microsoft.com/en-us/library/cc144361.aspx. If you do make changes to the program, make sure to use Save-SCCMProgram when you're finished.

Distribute it to distribution points

 $distributionPoints = Get-SCCMDistributionPoints

 Add-SCCMPackageToDistributionPoint `
                     -packageId $newPackage.packageID `
                     -distributionPointList $distributionPoints

Create a collection in order to test the package

 $newCollection = New-SCCMStaticCollection `
                     -collectionName $newCollectionName `
                     -parentCollectionId $parentCollectionId

Add a computer to the test collection

 $testComputer = Get-SCCMComputer -computerName $testComputerName

 Add-SCCMComputerToCollection `
                     -resourceId $testComputer.ResourceID
                     -collectionId $testCollection.CollectionID

Advertise the program to the test collection
```
 $newAdvertisement = New-SCCMAdvertisement `
                     -advertisementName $advertisementName `
                     -collectionId $newCollection.CollectionID `
                     -packageId $newPackage.PackageID `
                     -programName $newProgram.ProgramName
```
The advertisement will be created with default settings, but you can customize it further if you wish (usually by setting advertisement flags). Look at this link for some more information about advertisement flags and settings http://msdn.microsoft.com/en-us/library/cc146108.aspx. If you do make changes to the advertisement, make sure to use Save-SCCMAdvertisement when you're finished.

Instruct the test computer to retrieve new machine policies

 Invoke-SCCMClientAction `
                     -computerName $testComputerName
                     -scheduleId "MachinePolicyRetrievalEvalCycle"

andrebocchini/sccm-powershell-automation-module

About

Installation

Usage

Examples