==CHATSRV==
Version 0.5 / 09.06.2012
--=[ Disclaimer ]=-----------------------------------------------------//
This document describes CHATSRV, a tool which serves as a multi-threaded
chat server written in C.
The author of this document provides the software AS IS and and cannot
be made responsible for any damage that may occur while using this tool.
This software may contain errors or may not work properly in certain
circumstances. Therefore, use this tool at your own risk.
You can use this tool free of charge and you are allowed to freely
modify and distribute it. Please check section "License" for more
details.
--[ Contents ]----------------------------------------------------------
1 - Introduction
2 - The Tool
2.1 - Features
2.2 - Usage
2.2.1 - Command-line Arguments
2.2.2 - Starting the Chat Server
2.2.3 - Connecting to the Chat Server
2.2.4 - Disconnecting from the Chat Server
2.2.5 - Shutting Down the Chat Server
2.2.6 - Redirecting the Server Console Output to a File
2.3 - Supported Chat Commands
2.4 - Building from Source
2.5 - License
2.6 - Source Code Repository
2.7 - Known Issues
2.8 - Reporting Bugs and Features
3 - Bibliography
4 - Contact
--[ 1 - Introduction ]--------------------------------------------------
CHATSRV serves as an example of a chat server implemented in C. In order
to use the chat server, clients connect to it by using a simple telnet
client, such as linux or windows telnet or putty.
This tool was built as part of a seminar paper worked on at school.
--[ 2 - The Tool ]------------------------------------------------------
----[ 2.1 - Features ]--------------------------------------------------
The current version of CHATSRV offers the following features:
+ Multi-Threading:
CHATSRV is implemented as a multi-threaded chat server. For each
incoming client connection, a new thread will be created, which
handles incoming messages from clients.
+ Command-Line Parameters
Pass command-line parameters to the server to configure its
behaviour in more detail. Parsing of command-line parameters is done
by using the GNU getopt library.
+ Advanced Logging
CHATSRV uses a special logging mechanism, which allows to print log
messages on the server console using different log levels. Supported
log levels include ERROR, INFO and DEBUG. Each log message includes
a detailled timestamp.
+ Fast Reuse of Sockets
After shutting down CHATSRV, its TCP connection is held in a
TIME_WAIT state for a certain amount of time (depends on OS). This
can become unhandy if the server shall be restarted and the service
interruption shall be kept at a minimum. Therefore, CHATSRV
implements a special behaviour, which allows for faster reuse of a
previously used TCP port to bring the server back online very fast.
+ Graceful Server Shutdown Using Signals
CHATSRV implements signal handling capabilities which allow a
server administrator to perform a graceful shutdown. After receiving
either the SIGINT or the SIGTERM signal, CHATSRV cleans up allocated
memory, closes socket connections and terminates running threats.
Then it terminates itself and returns to the shell.
+ ANSI Color Support
To better distinguish between each others messages. Uses various of
colors to improve display of messages.
+ Joiner / Leaver Notification
If a user joins or leaves the chat server, all other users will be
notified.
+ Support for Nickname Change
Users can change their nicknames during a chat session. All other
users will be notified about this change.
+ Duplicate Nickname Detection
Recognizes if other chat buddies already use the desired nickname.
The user is notified about that and asked to choose another name.
+ Private Messages
Users can send private messages to each others. Private messages
are only visible to the sender and the receiver.
----[ 2.2 - Usage ]-----------------------------------------------------
This chapter explains basic usage of CHATSRV.
----[ 2.2.1 - Command-line Arguments ]----------------------------------
The following command-line arguments are supported:
--ip=<ip address>, -i <ip address>
Specifies the ip address which shall be used by CHATSRV. If no ip
address is specified, 127.0.0.1 will be used by default.
--port=<port number>, -p <port number>
Specifies the TCP port to be used by CHATSRV. If no port is
specified, port 5555 will be used by default.
--loglevel=<level>, -l <level>
Specifies the desired log level. The following levels are supported:
1 = ERROR (Log errors only)
2 = INFO (Log additional information)
3 = DEBUG (Log debug level information)
If no log level is specified, INFO will be used by default.
--version, -v
Displays version information.
--help, -h
Display help page.
----[ 2.2.2 - Starting the Chat Server ]--------------------------------
Usage of this tool is quite simple. Do start the chat server, simply
issue the following command on the shell:
$ ./chatsrv
This starts CHATSRV using its default configuration. Use the following
command, if you would like to specify ip address and port:
$ ./chatsrv --ip=192.168.1.1 --port=8888
This starts CHATSRV on ip address 192.168.1.1, listening on port 8888.
----[ 2.2.3 - Connecting to the Chat Server ]---------------------------
In order to be able to chat with others, you must connect to CHATSRV
first. to do this, you'll only need a simple telnet client:
$ telnet 192.168.1.1 5555
This connects you to the chat server running on 192.168.1.1, port 5555.
You can now start entering your messages. Your messages will be
broadcasted to all other logged in users on this chat server.
----[ 2.2.4 - Disconnecting from the Chat Server ]----------------------
To disconnect from the chat server, use the /quit command. See 2.3 for
a detailed list of supported chat commands.
----[ 2.2.5 - Shutting Down the Chat Server ]---------------------------
The proper way to shutdown the chat server is either by entering
Ctrl + C on the console screen of the running CHATSRV program or by
sending a SIGINT or SIGTERM signal to the CHATSRV process by using the
kill command as an example:
$ ./kill -s SIGTERM 4344
This sends the SIGTERM to the process running using a PID of 4344.
----[ 2.2.6 - Redirecting the Server Console Output to a File ]---------
If you like to keep your chat logs, just redirect the server console
output to a text file by starting CHATSRV using the following commands:
$ ./chatsrv -l 3 | tee chatsrv.log
----[ 2.3 - Supported Chat Commands ]-----------------------------------
The chat server recognizes the following commands from clients:
/nick <nickname>
Allows the user to change his nickname to <nickname>. Plese note,
that, for security reasons, only letters a-z, A-Z and numbers 0-9
are allowed to build a nickname.
/msg <nickname> <message>
Sends a private message <message> to user <nickname>.
/me <message>
Use this to say something about yourself. /me will be replated
with your own nickname.
/quit
Disconnects the user from the chat server.
----[ 2.4 - Building from Source ]--------------------------------------
Before you can build the tool from source, your system must meet some
preconditions. Currently they are:
+ gcc must be installed.
+ make must be installed.
The source distribution can be built from source by conducting the
following steps on your box:
1. Copy the file chatsrv-<version>.tar.gz to your linux box. Make
sure, it is located in a dedicated directory, since extraction
will put the files directly in there.
2. Extract the tarball using:
$ tar xvf chatsrv-<version>.tar.gz
3. Compile the source code using:
$ make
Optionally, you can compile it in debug mode in order to add debug
information to the resulting binary. You'll need that only if you
like to debug using gdb. To create a debug binary invoke:
$ make DEBUG=1
The resulting binary is now ready to use.
As for now, I've tested the CHATSRV binary on the following platforms
and it seems to just runs fine:
+ Arch Linux
+ Debian 6 Squeeze
----[ 2.5 - License ]---------------------------------------------------
Copyright 2012 André Gasser
CHATSRV is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
CHATSRV is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with CHATSRV. If not, see <http://www.gnu.org/licenses/>.
----[ 2.6 - Source Code Repository ]------------------------------------
The latest version of the tool is always available here:
+ https://github.com/shoka/chatsrv
----[ 2.7 - Known Issues ]----------------------------------------------
At the time of this writing, no problems related to this tool are known.
----[ 2.7 - Reporting Bugs and Features ]-------------------------------
This software is probably far away from a bug-free state. Because of
this, I am very glad to receive feedback from you regarding CHATSRV.
You can either contact me by mail or, even better, open a new issue on
github.com.
Although, I am not going to heavily enhance and improve this tool, I am
really glad to get feedback from you. If I find time, I'll fix the code.
Even better, if you could submit a patch. :)
----[ 3 - Bibliography ]------------------------------------------------
[1] Beginning Linux Programming, 4th Edition
N. Matthew, R. Stones, Wrox Press, 2008
ISBN: 978-0-470-14762-7
[2] The C Programming Language, 2nd Edition
B. Kerniham, D. M. Ritchie, Prentice Hall, 1988
ISBN: 0-13-110362-8
[3] Pthreads Programming
B. Nichols, D. Buttlar, J. Proulx Farrell, O'Reilly, 1996
ISBN: 1-56592-115-1
----[ 4 - Contact ]-----------------------------------------------------
Mail: andre.gasser@gmx.ch
Jabber: sh0ka@jabber.ccc.de
Blog: http://blog.andregasser.net