andrewrapp/xbee-arduino

Issues

• Is this project dead? (8 years without an update!)

  #98 opened 9 months ago by egnor
  1

• Doesn't work with XBee 3

  #88 opened 5 years ago by SWoto
  7

• Is there support for S3B?

  #53 opened 7 years ago by felixgalindo
  1

• Is this library still being maintained?

  #81 opened 2 years ago by Ruudjhuu
  4

• Platform IO - XBee.h not found

  #97 opened 3 years ago by RobertoD91
  1

• 64bit address in xbee Arduino Library

  #96 opened 3 years ago by SurajitGithub1234
  1

• why Xbee series 2 is not transmitting?

  #95 opened 3 years ago by zeeshan674
  1

• Route information packet

  #94 opened 3 years ago by Speedy2k
  0

• XBee S2C with ZigBee firmware

  #93 opened 4 years ago by IFlickerz
  1

• Packets aren't well read with SAMD board

  #56 opened 7 years ago by jmpmscorp
  1

• What is the status of this repo?

  #92 opened 4 years ago by duysqubix
  4

• Software Fix

  #91 opened 4 years ago by nicholasnobile
  2

• Series2_Rx doesn't catch messages

  #89 opened 4 years ago by gusantor
  1

• error: 'int printResponseCb' redeclared as different kind of symbol

  #87 opened 5 years ago by lalitsudhakar
  1

• Cannot compile with Uno WiFi Rev 2

  #86 opened 5 years ago by ChuckBell
  0

• Much needed example addition for ATCommands

  #85 opened 5 years ago by al-davis
  0

• Zdpscan problem

  #84 opened 5 years ago by guigaszf
  1

• Dose this library work with XBee S2C？

  #75 opened 6 years ago by 408881465
  4

• Does this library work with XBee s2c Pro and arduino due?

  #83 opened 5 years ago by claudioandres1677
  2

• Does this library work for Arduino Pro Mini?

  #63 opened 7 years ago by jyotirajsharma
  3

• Receiving byte array

  #82 opened 6 years ago by rikben
  1

• Does this library work with XBee S6B？

  #80 opened 6 years ago by ejurquet
  0

• readPacketUntilAvailable has weird behaviour

  #79 opened 6 years ago by Ruudjhuu
  1

• Is it possible to programmatically modify the configuration values of the Xbee?

  #76 opened 6 years ago by sdiaz-qkt
  1

• Can this library be used to send HTTP requests (GET, POST)?

  #78 opened 6 years ago by sdiaz-qkt
  0

• Failed to modify AT command.

  #77 opened 6 years ago by sdiaz-qkt
  0

• Arduino Uno Xbee RS485

  #74 opened 6 years ago by ckwan2018
  0

• Configure xbee module on Device Manager?

  #72 opened 6 years ago by Albertma126
  1

• Byte Escaping Hardcoded

  #71 opened 6 years ago by skyguy126
  1

• Arduino + XBee S2B ZB : Failed when sending to a specific XBee address

  #46 opened 8 years ago by TiksTriks
  4

• Send from XCTU Coordinator to Arduino Router Did Not Work

  #69 opened 6 years ago by facetime88
  0

• Route recoird indicator library

  #68 opened 6 years ago by mbPejvak
  0

• Series1, S1, Series2, S2 confusion

  #67 opened 6 years ago by gregc7320
  0

• Need An Example For AT Command With Value and ValueLength.

  #62 opened 7 years ago by limbongofficial
  4

• Different between Explicit Rx Indicator and received packet frame

  #66 opened 7 years ago by victors0991
  0

• Ack packet from receiver

  #65 opened 7 years ago by victors0991
  9

• [solved] library isnt able to communicate between xbees

  #64 opened 7 years ago by ajinkya-open
  0

• AtCommand on Series1 no response

  #61 opened 7 years ago by pmeloy
  1

• Unsuccessful sending and receiving packet

  #60 opened 7 years ago by Isayy
  0

• Zdp Scan function is not searching unless serial monitor is ON

  #59 opened 7 years ago by jyotirajsharma
  5

• Value being received is not what is expected

  #58 opened 7 years ago by naren16
  1

• Packets not transmitted from Coordinator to Reciever

  #57 opened 7 years ago by naren16
  0

• Need a function to return RSSI value in API frame for Series 2

  #55 opened 7 years ago by jyotirajsharma
  0

• Message is seen to be delivered even tough the coordinator is unplugged.

  #54 opened 7 years ago by jonathanendersby
  0

• Nothing printed at Serial

  #52 opened 7 years ago by paulorenatoxs
  0

• Xbee S2C With ZigBee firmware can't communicate in API mode

  #51 opened 7 years ago by cent89
  0

• XBee S3B doesn't respond to OP or MY

  #50 opened 7 years ago by andrewthefish
  0

• Arduino library manager out of date

  #47 opened 8 years ago by tommag
  0

• End Device API (E) to Router Device API (R) communication is not working

  #45 opened 8 years ago by jyotirajsharma
  0

• Arduino Mega 2560 Software Serial Not Working

  #44 opened 8 years ago by bluewookie88
  0