for the file xfer tool see
/home/andrewh/Source/Elcometer/BostonGauge/bostongauge/Tools/elcoTx.c
TODO: Copy this somewhere else and rename.
Profiles are in ./mbed-os/tools/profiles
// mosi, miso, sck, cs
blockDevice = new SDBlockDevice (PA_7, PA_6, PA_5, PA_8);On Nucleo-F411RE
| Signal | Pin |
|---|---|
| mosi | PA_7 |
| miso | PA_6 |
| sck | PA_5 |
| cs | PA_8 |
on STM32f4-discovery
| Signal | Pin |
|---|---|
| SD_MOSI | PC_3 |
| SD_MISO | PC_2 |
| SD_SCK | PB_10 |
| SD_CS | PE_2 |
// Generic signals namings
LED1 = PA_5,
LED2 = PA_5,
LED3 = PA_5,
LED4 = PA_5,
LED_RED = LED1,
USER_BUTTON = PC_13,
// Standardized button names
BUTTON1 = USER_BUTTON,
SERIAL_TX = STDIO_UART_TX,
SERIAL_RX = STDIO_UART_RX,
USBTX = STDIO_UART_TX,
USBRX = STDIO_UART_RX,
I2C_SCL = PB_8,
I2C_SDA = PB_9,
SPI_MOSI = PA_7,
SPI_MISO = PA_6,
SPI_SCK = PA_5,
SPI_CS = PB_6,
PWM_OUT = PB_3,