WildRig Multi

multi algo miner for AMD, NVIDIA and Intel gpu's

KNOWN ISSUES

nexapow is not supported on AMD gpu's with pre-RDNA architecture
any report is welcome! :)

SUPPORTED GPU's

AMD:

GCN 2nd gen: Radeon R7 260, R9 290, R9 295X2, R7 360, R9 390
GCN 3rd gen: Radeon R9 285, R9 380, R9 Fury, R9 Nano
GCN 4th gen: Radeon RX 460, 470, 480, 550, 560, 570, 580, 590
GCN 5th gen: Radeon Vega 56, Vega 64, Vega FE, Radeon VII
RDNA 1st gen: Radeon RX 5500, 5600, 5700
RDNA 2nd gen: Radeon RX 6500, 6600, 6700, 6750, 6800, 6900, 6950
RDNA 3nd gen: Radeon RX 7600, 7700, 7800, 7900

Pitcairn, Tahiti and other old cards of GCN 1st gen(like HD 78x0, HD 79x0, R7 265, R9 270, R9 280, R9 370, etc.) are not supported and won't be, because they are too old and need additional work.

NVIDIA:

All gpu's with Compute Capabilities >=5.0 should work using drivers 452.39+ on Windows and 450.80.02+ on Linux

INTEL:

Intel Arc: A310, A350M, A370M, A380, A530M, A550M, A570M, A580, A730M, A750, A770M, A770
Intel Arc Pro: A30M, A40/A50, A60M, A60
Intel Data Center GPU: Flex 140, Flex 170

SUPPORTED ALGORITHMS

aergo, anime
bcd, bitcore, blake2b-btcc, blake2b-glt, blake2s, blake3, bmw512
c11, curvehash
dedal
evrprogpow
firopow
geek, ghostrider, glt-astralhash, glt-globalhash, glt-jeonghash, glt-padihash, glt-pawelhash
heavyhash, hex, hmq1725
kawpow
lyra2tdc, lyra2v2, lyra2v3, lyra2vc0ban
megabtx, memehash, meowpow
nexapow, nist5
phi, phi5, progpowz, progpow-ethercore, progpow-sero, progpow-telestai, progpow-veil
quark, quibit
rwahash
sha256, sha256csm, sha256d, sha256q, sha256t, sha512256d, shandwich256, skein2, skunkhash, skydoge
timetravel, tribus
vprogpow
x7, x11, x11k, x12, x13, x14, x15, x16r, x16rv2, x16rt, x16s, x17, x18, x20r, x21s, x22i, x25x, x33, xevan

DEV-FEE:

0.75%:
- evrprogpow
- firopow
- heavyhash
- kawpow
- memehash
- meowpow
- nexapow
- progpowz
- sha512256d
- skein2
- and all other non-listed below algorithms
1.00%:
- curvehash
- ghostrider
- mike
2.00%:
- rwahash
- sha256csm
- skydoge
5.00%:
- x7

OPTIONS

Usage: wildrig [OPTIONS]

  Some parameters can be set per gpu, use comma to separate each gpu and * to skip

Options:
  -a, --algo ALGO               specify the hash algorithm to use
      --benchmark                run offline benchmark
      --benchmark-hashorder      run offline benchmark and/or set hash order for benchmark
      --benchmark-epoch          run offline benchmark and/or set epoch for benchmark
      --benchmark-block          run offline benchmark and/or set block for benchmark
      --benchmark-timeout        run offline benchmark and/or set how long to run benchmark in seconds(default: 0)

  -o, --url URL                  URL of mining server
      --proxy                    set ip:port to connect via SOCKS5 proxy
  -O, --userpass U:P             username:password pair for mining server
  -u, --user USERNAME            username for mining server
  -p, --pass PASSWORD            password for mining server
  -w, --worker WORKERNAME        worker name(progpow variants only)
  -r, --retries N                number of times to retry before switch to backup server (default: 1)
  -R, --retry-pause N            time to pause between retries (default: 5)
      --max-rejects N            number of one by one rejects before switch to backup server (default: 5)
      --max-difficulty N         maximum difficulty to accept from pool(unit: M), otherwise reconnect (default: 0)

      --send-stale               send stale shares
      --diff-factor N            difficulty factor to use instead of algo default(default: 0)
      --no-extranonce            disable exranonce subscription
      --protocol PROTOCOL        set stratum protocol(ethproxy, ethstratum, stratum, stratum1, stratum2)

      --watchdog                 enable checking how long videocards are running OpenCL kernel(terminate if more than 30 sec.)
      --watchdog-script FILE     file to execute when watchdog triggers(can be used without --watchdog parameter)
      --strategy N               strategy of feeding videocards with job(default: 0)
      --split-job N              amount of gpu's(or threads of it, keep this in mind) solving one job

      --opencl-platforms LIST    list of OpenCL platforms to use(amd, nvidia or intel; default: all)
  -d, --opencl-devices LIST      list of OpenCL devices to use(default: all)
      --force-eff-mode           force to use efficient kernels when possible(e.g. memehash, skydoge)
      --progpow-kernel           depends on drivers values 1 or 2 can provide better hashrate for ProgPow(default: 0)
      --no-dag-split             disable splitting DAG on two parts(have sense only if AMD fix this problem in their drivers)
      --print-platforms          print available OpenCL platforms and exit
      --print-devices            print available OpenCL devices and exit

      --no-adl                   disable monitoring via ADL
      --no-igcl                  disable monitoring via IGCL
      --no-nvml                  disable monitoring via NVML
      --no-sysfs                 disable monitoring via sysfs

      --gpu-threads N            set amount of threads per gpu(default: auto)
      --gpu-affinity N           affine GPU threads to a specific CPU thread
  -i, --gpu-intensity N          set intensity per gpu(default: auto)

      --gpu-temp-limit N         set temperature at which gpu will stop mining(default: 85)
      --gpu-temp-resume N        set temperature at which gpu will resume mining(default: 60)

      --gpu-reset-oc             reset gpu overclock settings on start or when ZIL PoW Window ends
      --gpu-core-clock N         lock GPU core clock to N
      --gpu-core-offset N        set offset N for GPU core clock
      --gpu-memory-clock N       lock GPU memory clock to N
      --gpu-memory-offset N      set offset N for GPU memory clock
      --gpu-powerlimit N         set power limit for GPU to N
      --gpu-fan-speed N          set fan speed for GPU to N

      --zil-another-miner        pause mining during ZIL PoW Window so another miner can mine ZIL

      --zil-reset-oc             reset gpu overclock settings when ZIL PoW Window starts
      --zil-core-clock N         lock GPU core clock to N when ZIL PoW Window starts
      --zil-core-offset N        set offset N for GPU core clock when ZIL PoW Window starts
      --zil-memory-clock N       lock GPU memory clock to N when ZIL PoW Window starts
      --zil-memory-offset N      set offset N for GPU memory clock when ZIL PoW Window starts
      --zil-powerlimit N         set power limit for GPU to N when ZIL PoW Window starts
      --zil-fan-speed N          set fan speed for GPU to N when ZIL PoW Window starts

      --execute-at-start FILE    execute custom script before gpu initialization
      --execute FILE             execute custom script after gpu initialization or precompute stage, etc.
      --execute-wait N           wait for N seconds after executing the script (default: 1)

      --multiple-instance        allow multiple instances running at one time
  -l, --log-file FILE            log all output to a file

      --no-color                 disable colored output
      --print-time N             print hashrate report every N seconds
      --print-debug              print debug information

      --api-port N               port for API
      --api-worker-id ID         custom worker-id for API

  -h, --help                     display this help and exit
  -V, --version                  output version information and exit

andru-kun/wildrig-multi