Pinned Repositories
DumpertDowner
ESP32Cam
FordConnect
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
OctoPrint-PanTilt
Provides support in OctoPrint for controlling two servos using GPIO so a pan/tilt camera can be controlled.
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA.
PaperProxy
pir_sensor_valve
RFID
Unity-Grass-Bend
Some testing around the grass bending system in unity
antonhensen81's Repositories
antonhensen81/OctoPrint-PanTilt
Provides support in OctoPrint for controlling two servos using GPIO so a pan/tilt camera can be controlled.
antonhensen81/DumpertDowner
antonhensen81/ESP32Cam
antonhensen81/FordConnect
antonhensen81/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
antonhensen81/OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA.
antonhensen81/PaperProxy
antonhensen81/pir_sensor_valve
antonhensen81/RFID
antonhensen81/Unity-Grass-Bend
Some testing around the grass bending system in unity