For new versions, please go to rak_common_for_gateway
ttn_gateway based on the latest SX1301 driver lora_gateway v5.0.1 and semtech packet_forwarder v4.0.1
The aim of this project is to help users set up a LoRa network easily. The User Guide can be get from our Web.
This project currently provides support for the below platforms.
- RAK7243 (with LTE)
2019-06-18 RAK V2.8R
- 1.After the network is disconnected, lora_pkt_fwd restarts
- 2.Modify loraserver.toml for us915 and cn 470
- 3.Streamlined local_conf.json files
- 4.When ppp0 exists, the network is accessed by ppp0 by default
2019-05-06 RAK V2.7R
- Add AP mode
2019-04-25 RAK V2.6R
- Add loraserver
2019-03-28 RAK V2.4R
- User can modify the baud rate of the LTE module
2019-03-19 RAK V2.3R
- Initial version create
- I2C interface for GPS
- LTE support
If you want to use the precompiled firmware image directly, please download the latest one from RAK website: https://www.rakwireless.com/en/download/LoRa/Pilot-Gateway-Pro-RAK7243#Firmware Please download the one named "RAK7243_LTE_...". Then you can burn it into SD card according this document: https://www.rakwireless.com/en/download/LoRa/Pilot-Gateway-Pro-RAK7243#Tool
step1 : Download and install Raspbian Stretch LITE
step2 : Use "sudo raspi-config" command, enable spi and i2c interface
step3 : Clone the installer and start the installation
$ git clone https://github.com/RAKWireless/RAK7243-LoRaGateway-RPi-Raspbian-OS.git
$ cd ~/RAK7243-LoRaGateway-RPi-Raspbian-OS
$ sudo ./install.sh
step4 : Next you will see some messages as follow. Just hit the Enter key to keep default or enter your information if you want.
Host name [rak-gateway]:
Latitude [0]:
Longitude [0]:
Altitude [0]:
step5 : Now you have a running gateway after restart!
step6 : If you have a sim card, you can config network selection for sim card, refers to RAK7243-LoRaGateway-RPi-Raspbian-OS/rak_ppp/at.txt:
step7 (Optional):You can use the command "sudo gateway-config" to select other bands if your hardware supports.
You can use this firmware according the document: https://www.rakwireless.com/en/download/LoRa/Pilot-Gateway-Pro-RAK7243#Application-Notes