Pinned Repositories
ADC-SPI-Interface-FPGA-
Currently not working properly
Anti-Helmholtz-Magnets
MATLAB code the takes in parameters about the design of the magnetic coil pair and models it to ensure that the coils will work as planned.
ColdAtomCalculations
This repository contains the routines for analyzing the data from a cold atom-based experiment, such as atom number calculation, temperature measurement of a MOT, etc.
Cs_laser_lock_davl
Arduino servo to lock the frequency of the Cs laser
current-controller
Ultra low-noise current controller for laser diodes
Curve-Fitting-Scipy-python-
This is a generic gaussian, lorentzian and voigt fit code.
GaN-Amplifier
High-power, wide-bandwidth RF amplifier
Grav3D
Grav3D: A matlab code for 3D forward and inverse modeling of gravity data
Gravimetry-For-Mass-Detection
Simple gravimetry data containing vertical acceleration can be used to detect mass beneath the earth surface. This python code is an attempt to do so with simulated gravity acceleration data.
PyGnuplot
Python interface to gnuplot
apoorav-singh's Repositories
apoorav-singh/Grav3D
Grav3D: A matlab code for 3D forward and inverse modeling of gravity data
apoorav-singh/PyGnuplot
Python interface to gnuplot
apoorav-singh/ADC-SPI-Interface-FPGA-
Currently not working properly
apoorav-singh/Anti-Helmholtz-Magnets
MATLAB code the takes in parameters about the design of the magnetic coil pair and models it to ensure that the coils will work as planned.
apoorav-singh/ColdAtomCalculations
This repository contains the routines for analyzing the data from a cold atom-based experiment, such as atom number calculation, temperature measurement of a MOT, etc.
apoorav-singh/Cs_laser_lock_davl
Arduino servo to lock the frequency of the Cs laser
apoorav-singh/current-controller
Ultra low-noise current controller for laser diodes
apoorav-singh/Curve-Fitting-Scipy-python-
This is a generic gaussian, lorentzian and voigt fit code.
apoorav-singh/GaN-Amplifier
High-power, wide-bandwidth RF amplifier
apoorav-singh/Gravimetry-For-Mass-Detection
Simple gravimetry data containing vertical acceleration can be used to detect mass beneath the earth surface. This python code is an attempt to do so with simulated gravity acceleration data.
apoorav-singh/harmonica
Forward modeling, inversion, and processing gravity and magnetic data
apoorav-singh/hv-piezo-driver
Safe and compact low power high voltage controller for piezoelectric actuators
apoorav-singh/iDS_camera_Interface
Camera Interface. Other cameras can also be interfaced with minor tweeks
apoorav-singh/inkscapeCircuitSymbols
Inkscape extension to assist creating circuit symbols.
apoorav-singh/Linear-Temperature-Controller
A linear temperature controller based on Team Wavelength's WTC3243 chip, controlled by an Teensy.
apoorav-singh/linien
Spectroscopy lock application using RedPitaya
apoorav-singh/mendeley-downloader
This version of Mendeley downloader resolves few of the errors that you might encounter running the original version. Please refer to the original author for updates.
apoorav-singh/nV-Hunter-voltage-probe
apoorav-singh/One-Inch-Photodetector
Photodiode transimpedance amplifier, on a one inch diameter circular PCB
apoorav-singh/Photodetector_2stage_OPA818
apoorav-singh/project-website-template
A HTML/CSS Template for Building Projects or Personal Websites
apoorav-singh/pyl-621_numerical_course
This was a Numerical Computation Course at IIT Mandi. Code that I wrote for assignment is being uploaded to this repository.
apoorav-singh/pyl800_numerical
apoorav-singh/pyrpl
pyrpl turns your RedPitaya into a powerful DSP device, especially suitable as a lockbox in quantum optics experiments.
apoorav-singh/rayopt
Python optics and lens design, raytracing
apoorav-singh/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board
apoorav-singh/Simple-PID-correction
It's a simple PID simulator.
apoorav-singh/ZoomedPlot
Simple code to plot zoomed out plot inside the main plot window. The code is written in python using matplotlib library.