/porousMultiphaseFoam

A porous multiphase toolbox for OpenFOAM

Primary LanguageC++OtherNOASSERTION

Error in user YAML: (<unknown>): found character that cannot start any token while scanning for the next token at line 1 column 1
---
		 _______  ____    ____  ________  
 		 |_   __ \|_   \  /   _||_   __  | 
   		   | |__) | |   \/   |    | |_ \_| 
   		   |  ___/  | |\  /| |    |  _|    
    		  _| |_    _| |_\/_| |_  _| |_     
   		 |_____|  |_____||_____||_____|    

**** PorousMultiphaseFoam (PMF) for OpenFOAM ****

---

Branches

Development branches: dev works with OpenFOAM-v2106

  • branch dev works with OpenFOAM-v2106 (openfoam.com)
  • branch dev_org works with OpenFOAM-v9 (openfoam.org)

The current branches (last version of the toolbox)

  • branch openfoam-v2106 > PMFv2107.1
  • branch openfoam-v2006 > PMFv2107.1
  • branch openfoam-v1906 > PMFv2107.1
  • branch openfoam-v9 > PMFv2107.1
  • branch openfoam-v8 > PMFv2107.1

Old branches not updated

  • branch openfoam-v7 > PMFv2107
  • branch openfoam-v1812 > PMFv1906
  • branch openfoam-v6 > PMFv1906
  • branch openfoam-v5 > PMFv1809
  • branch foam-extend-4.0 > PMFv1809
  • branch openfoam-v1806 > PMFv1809
  • branch openfoam-v1712 > PMFv1805

Older version (no branches)

  • OpenFOAM 4.0 PMFv1.4.1
  • OpenFOAM 3.0 PMFv1.2

version not supported:

  • OpenFOAM 2.4 and older
  • foam-extend 3.2 and older
  • OpenFOAM v1706 and older
  • OpenFOAM v1812/v1912/v2012

General Informations

  • This toolbox needs only a standard OpenFOAM installation (see www.openfoam.org or www.openfoam.com)

  • Please cite the related paper in the "doc" folder if you are using this toolbox.

  • Read the COPYING_OPENFOAM file for information about OpenFOAM and this toolbox Copyrights.

Installation instructions :

  • First, source the OpenFOAM configuration file, i.e. (example for ubuntu version) :

source /opt/openfoamv6/etc/bashrc

  • then in the "porousMultiphaseFoam" directory, run :

./Allwmake -jX

to install the package (with X the number of processors).

  • Dynamic libraries are compiled in the standard OpenFOAM user directory :

$FOAM_USER_LIBBIN

  • The executable solver "impesFoam" is placed in the standard OpenFOAM user directory $FOAM_USER_APPBIN.

  • Each tutorial directory contains "run" and "clean" files to test installation and validate the solver.

  • A python script runTutorials.py can be used to test all components.

  • To remove compilation and temporary files, run :

./Allwclean

  • see the ReleaseNotes.txt file for detailed information about the toolbox.