This simple adapter allows to relocate the pistorm to use it on the A2000 CPU slot and be able to properly close the case. It has been designed specially to use with the PISTORM board (Claude's Schwarz design).
Picture might not correspond with the current gerbers.
2 layer board. Use your favorite pcb manufacturer to build this pcb using the gerbers available on the gerbers folder. Recommended PCB manufacturers: ALLPCB, JLCPCB and PCBWAY.
Choose Vcut and gold enig finish on the PCB for a better contact.
| Name | Value | Footprint |
|---|---|---|
| C1 | 22uf | C0805 |
| C2 | 100nf | C0805 |
In order to build your relocator, you will need 2 female pins. As for the pins, Here are the example references.
2x 1x40 male to female pins.
21-08-2021 Increased powerline, just in case and added a fan connector.
15-06-2021 JLCPCB complains that there is not board outline (dimension layer). I've remade.
07-06-2021 - Initial release.
This is a work in progress, more testing needs to be done, but it should work as is. I take no responsibiltiy for any damage to any equipment that results from the use of this board. USE AT YOUR OWN RISK!
If you like the project or want to support it, you can buy me a beer or a KO-FI :)
ATTENTION: This is for eBay sellers: this project was made for the retro community and not for resale on eBay. So only retro hardware forums and individual people can build this project. IT'S NOT FOR EBAY SALE.
Shield:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
