Little adapter to plug on the back of any 50 pin male scsi devices and output 13x2 (26pin) scsi hosts. Like Blizz* SCSI module for example.
From the 50 pin connector to the 26 pin connector.
(50 Female) 2 - 50 to (26 IDC Male) 1 - 25 signals.
(50 Female) 1-49 GND
(26 IDC Male) 26 not connected.
This is a work in progress, several testing must be made but it should work as is. I take no responsibiltiy for any damage to any equipment that results from the use of this board. USE AT YOUR OWN RISK!
If you like the project or want to support it, you can buy me a beer or a KO-FI :)
12/11/2019: Updated license stuff (I usually not do this but I must start it with this).
12/09/2018 Fixed a problem with the scsi data pinout.
05/09/2018 Initial release.
Part | Value |
---|---|
CONN1 | 2x25 pin female 2.54 connector |
CONN2 | 2x13 idc male 2.54 |
Also a IDC 26 female to female cable needed in order to connect the board to the host.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.