This simple adapter allows to use a 68000 DIP CPU standard into a X68000 machine. The measures has been taked on a Ace machine. It has been designed specially to use with the PISTORM board (Claude's Schwarz design).
This will electronically work with PISTORM but firmware needs some work and is not ready yet. Do not stalk Claude's or other developers, give these people some time to develop updates for this machine.
2 layer board. Use your favorite pcb manufacturer to build this pcb using the gerbers available on the gerbers folder. Recommended PCB manufacturers: ALLPCB, JLCPCB and PCBWAY.
| Name | Value | Footprint |
|---|---|---|
| C1 | 22uf | C0805 |
| C2 | 22uf | C0805 |
| C2 | None | None |
In order to build your relocator, you will need 2 female pins. As for the pins, Here are the example references.
2x 1x40 2.54 male to female pins.
2x 1x40 1.27 male to male pins.
07-06-2021 - Retouched VCC lines for high current. 07-06-2021 - Initial release.
This is a work in progress, more testing needs to be done, but it should work as is. I take no responsibiltiy for any damage to any equipment that results from the use of this board. USE AT YOUR OWN RISK!
If you like the project or want to support it, you can buy me a beer or a KO-FI :)
ATTENTION: This is for eBay sellers: this project was made for the retro community and not for resale on eBay. So only retro hardware forums and individual people can build this project. IT'S NOT FOR EBAY SALE.
Shield:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
