A tiny program use for UART console by Openmoko
Just run
$ make
To connect to the UART use
$ ./neocon <ttyUSB_device> -b <baud_rate>
For example
$ ./neocon /dev/ttyUSB0 -b 115200
To quit neocon type
~.
original made by Openmoko
A tiny program use for UART console by Openmoko
Just run
$ make
To connect to the UART use
$ ./neocon <ttyUSB_device> -b <baud_rate>
For example
$ ./neocon /dev/ttyUSB0 -b 115200
To quit neocon type
~.
original made by Openmoko