ardexa/meteorological-sites

Collect from Meteorological Sites and send the data to your cloud using Ardexa

Purpose

The purpose of this project is to collect data from Meteorologial sites, and send it in real time to your cloud.

How to use the script

On a raspberry Pi, or other Linux machines (arm, intel, mips or whetever), make sure Python is installed (which it should be). Then install the BeautifulSoup4 dependancy as follows:

sudo pip install BeautifulSoup4

Then install and run it as follows:

cd
git clone https://github.com/ardexa/meteorological-sites.git
cd meteorological-sites
python meteoclimatic.py {STATION ID} {STATION NAME} {log directory} {debug type}  .... example: sudo python meteoclimatic.py ESAND1800000018110A spain-albolote /opt/data 0

Meteorological Sites

The following sites are handled by these scripts:

meteoclimatic.net ... example: https://www.meteoclimatic.net/perfil/ESAND1800000018220A

Collecting to the Ardexa cloud

Collecting to the Ardexa cloud is free for up to 3 Raspberry Pis (or equivalent). Ardexa provides free agents for ARM, Intel x86 and MIPS based processors. To collect the data to the Ardexa cloud do the following: a. Create a RUN scenario to schedule the Ardexa Kaco script to run at regular intervals (say every 300 seconds/5 minutes). b. Then use a CAPTURE scenario to collect the csv (comma separated) data from the filename /opt/data/logs/. This file contains a header entry (as the first line) that describes the CSV elements of the file.

Help

Contact Ardexa at support@ardexa.com, and we'll do our best efforts to help.