arduino-libraries/ArduinoBLE

Issues

• CYW43439 chip support

  #320 opened 4 months ago by samartzidis
  1

• Add support for the "Adafruit Feather RP2040 RFM69" board

  #403 opened 4 months ago by gaellalire
  1

• Suggestion: Universal board support.

  #398 opened 6 months ago by dojyorin
  0

• Compilation failed when _BLE_TRACE_ enabled

  #355 opened 7 months ago by vovagorodok
  0

• build failure for ESP32-C6 target

  #365 opened 7 months ago by lyusupov
  1

• Warnings when compiling this code

  #310 opened 7 months ago by roleroz
  5

• `lld_pdu_get_tx_flush_nb HCI packet count mismatch (10, 11)`

  #359 opened 9 months ago by Blue186
  1

• 22-byte Name descriptor (0x2901) throws GATT error 7 (offset error) - shorter or longer names are fine

  #383 opened 9 months ago by madmanguruman
  1

• Event Handling Mix-up in ArduinoBLE with Multiple Peripherals

  #379 opened 10 months ago by nikolaytsigvintsev
  0

• BLE.advertise() Failure Makes BLE Unusable Until Next Reset

  #378 opened 10 months ago by AndrewDile
  0

• HCI_LE_Read_Local_P-256_Public_Key Command Not Working on Giga R1

  #377 opened a year ago by Gokikun
  1

• system crashes and restart when doing discoverAttributes

  #375 opened a year ago by baykey
  0

• BLEService does not survive BLE cycles

  #357 opened 2 years ago by OpenSrcerer
  1

• Pairing/Bonding for NRF52840

  #372 opened a year ago by yhur
  0

• (support) Cannot write to BLE characteristic with vector

  #369 opened a year ago by MaxMyzer
  3

• BLE Long Range or Incresing Tx Power

  #314 opened 2 years ago by gsmith0123
  2

• Infinite connect/disconnect loop when trying to reconnect

  #367 opened a year ago by asegurala
  1

• BLE.begin() succeeds only the first time in Arduino giga

  #362 opened a year ago by FalsinSoft
  1

• Error on connection: `E (23013) BT_SMP: smp_derive_link_key_from_long_term_key failed`

  #361 opened a year ago by topcoco
  4

• txCharacteristic.setValue() doesn't notify central

  #360 opened 2 years ago by vovagorodok
  1

• Aduino uno R4 wifi connecting via bluetooth to arduino NANO 33 BLE reading/checking characteristic causes huge delays whilst trying to drive stepper motors

  #358 opened 2 years ago by CG528
  0

• Immediate Panic on Portenta H7 M4 Core

  #333 opened 2 years ago by trylaarsdam
  5

• setValue() notifies twice

  #335 opened 2 years ago by vovagorodok
  2

• ArduinoBLE on Giga R1 can only run on the main core

  #330 opened 2 years ago by Nocentinia
  0

• Broadcast BLE data without connecting

  #347 opened 2 years ago by tech9492
  1

• BLE.scan will not work after a BLE.scanFor[Uuid|Name|Address], even after a BLE.stopScan

  #350 opened 2 years ago by andrewchilds
  0

• `BLEStringCharacteristic` is undocumented

  #349 opened 2 years ago by per1234
  0

• HCI.cpp:991:7: error: case value '10' not in enumerated type 'LE_META_EVENT'

  #346 opened 2 years ago by franciozzy
  1

• cannot subscribe BOOT_MOUSE_INPUT_REPORT

  #344 opened 2 years ago by henry63
  1

• Add function for detecting characteristic change

  #343 opened 2 years ago by ChrisPallasch
  0

• Arduino Nano ESP32 support is not documented

  #342 opened 2 years ago by sylque
  0

• Advertising multiple services

  #341 opened 2 years ago by mgsimon
  0

• starting Bluetooth® Low Energy module failed on Arduino Uno R4 WiFi

  #339 opened 2 years ago by Dario-Ciceri
  1

• Compatibility with Arduino Uno R4 WiFi

  #338 opened 2 years ago by Dario-Ciceri
  3

• `BLE.central().connected()` is `true` when a disconnect has happened

  #334 opened 2 years ago by cab938
  1

• Incorect baud rate for Nano Connect RP2040?

  #332 opened 2 years ago by paulhamsh
  2

• problems connecting to a device

  #329 opened 2 years ago by Nocentinia
  1

• Get notification from HID characteristic

  #328 opened 2 years ago by SimonFilgis
  3

• ATT Read by Type Request does not return Characteristic Descriptors

  #326 opened 2 years ago by mringwal
  0

• Issue with a new board

  #325 opened 2 years ago by VEGA-Processor
  2

• Arduino R4 WIFI: If a Servo is added to a BLE sketch, incorrect UUID is returned by peripheral

  #311 opened 2 years ago by MrYsLab
  2

• Version 1.3.6 still doesn't work with UNO R4 WiFi in real life

  #322 opened 2 years ago by ArduinoManager
  2

• Adding a second characteristic stops the service to be reachable

  #309 opened 2 years ago by MicheleMas
  1

• If something within BLELocalDevice::begin() fail calls to end will fault

  #324 opened 2 years ago by KurtE
  0

• Support for NINA-B31 Modules

  #321 opened 2 years ago by felixerdy
  1

• HCICardioTransport - RingBuffer _rxBuf may not be safe

  #318 opened 2 years ago by KurtE
  0

• UNO R4 WIFI: 'SerialHCI' was not declared in this scope when compiled on a Windows 10 machine.

  #317 opened 2 years ago by MrYsLab
  1

• Arduino BLE (micro)freezes on weak Bluetooth connection.

  #315 opened 2 years ago by pyciko
  0

• Buffer overflow with Giga R1 WiFi

  #313 opened 2 years ago by controllercustom
  0

• Issue adding Descriptors to Arduino Nano 33 BLE

  #312 opened 2 years ago by dntpannik
  1