arduino/ArduinoCore-samd

Issues

• EXTINT[15] on D26 line, PA27

  #731 opened 7 months ago by 4project-co-il
  0

• Raspberry Pi install fails with "Tool avrdude not available for your operating system"

  #730 opened 8 months ago by robrennie
  0

• OTA functionality example does not work

  #729 opened 8 months ago by Gaveroid
  8

• Bug: digitalWrite() incorrectly uses DIRSET register instead of DIR register for pin direction checking

  #727 opened 8 months ago by jacoblgit
  0

• cores/arduino/api directory is missing

  #726 opened 9 months ago by 4project-co-il
  2

• <charconv> not found (and string_view, too)

  #725 opened 10 months ago by JetForMe
  1

• Serial Flush blocks forever but not only at programm start

  #678 opened 3 years ago by WMuellSika
  1

• Not defining USBCON broke since 1.8.14

  #723 opened a year ago by MSmeets94
  0

• Arduino Zero USB HID Broken and unusable Programing Port

  #663 opened 4 years ago by emergencyhamnet
  15

• analogRead buggy pin handling

  #720 opened a year ago by louisrubet
  2

• Where does the formula of BAUD comes from in SERCOM::initMasterWIRE( uint32_t baudrate )

  #719 opened a year ago by rawlines
  1

• Bootloader Make Issue

  #716 opened a year ago by andychu2888
  0

• Alternate SERCOM I2C Not Working On Pins PA08 and PA09 (4 and 3)

  #711 opened 2 years ago by DeltaAerospace
  2

• Possible race condition between Uart::write(data) and Uart::IrqHandler() ??

  #708 opened 2 years ago by Nels52
  4

• MKR Zero Battery Power

  #709 opened 2 years ago by jachenilleau
  1

• analogWrite() problems with PWM

  #705 opened 2 years ago by tedtoal
  0

• Doxygen comments

  #707 opened 2 years ago by tedtoal
  0

• _writeResolution, set by analogWriteResolution(), is shared by the DAC and PWM

  #704 opened 2 years ago by tedtoal
  0

• analogWrite() uses a threshold when writing to a digital port

  #706 opened 2 years ago by tedtoal
  0

• Disabling DAC when reading from ADC is a problem sometimes

  #703 opened 2 years ago by tedtoal
  0

• Serial buffer size unchangeable

  #700 opened 3 years ago by maxgerhardt
  3

• Please implement setWireTimeout() in SAMD Wire library

  #702 opened 2 years ago by mgrusin
  0

• Error: unable to find CMSIS-DAP device

  #701 opened 3 years ago by ISatByTheO
  0

• Error Writing into flash memory - Arduino Nano 33 IoT

  #660 opened 4 years ago by sntmasibon
  2

• Uploading new sketch after burning the mkrzero bootloader

  #699 opened 3 years ago by MOSHEMEL
  1

• SAMD SPI issues

  #698 opened 3 years ago by i-g-g-y
  0

• SFU Library not working for MKRNB1500

  #697 opened 3 years ago by Pinkert7
  0

• Cross-post: Increasing timing errors with rosserial

  #694 opened 3 years ago by Hommus
  0

• StandardFirmata on samd boards versions after 1.8.10 broken @ Arduino zero M0+ pro

  #691 opened 3 years ago by UnlimitedDrill001
  0

• is it possible to completley deinitialise usbhost

  #690 opened 3 years ago by hannescam
  0

• variant/mkrnb1500 SARA R410 UART not configured to utilize flow control (RTS/CTS)

  #689 opened 3 years ago by ardiri
  0

• USBCore SET_CONFIGURATION handler is not interrupt-safe

  #688 opened 3 years ago by AlanStern
  0

• SAMD21 micros() problem

  #684 opened 3 years ago by Peter28357
  5

• Typo in startup.c comment

  #685 opened 3 years ago by ayoung19
  0

• I2S_RIGHT_JUSTIFIED_MODE has no output

  #682 opened 3 years ago by PilnyTomas
  0

• SPI / SERCOM: SPI speed is not set

  #680 opened 3 years ago by fvzeppelin
  1

• Udp.h included in ArduinoCore-samd and in ArduinoCore-API

  #679 opened 3 years ago by PatrickDekker98
  4

• SPIClass::usingInterrupt() interruptMask not set correcly

  #677 opened 3 years ago by fterretf
  0

• SPI / SERCOM library sets SCK rate higher than maxSpeed specified in SPISetting

  #675 opened 3 years ago by greiman
  0

• Arduino hangs when reading from non-existent pins.

  #674 opened 3 years ago by AwesomeTornado
  0

• User-hostile library names (SBU, SDU, SFU, SNU, SSU)

  #662 opened 4 years ago by alranel
  2

• Support for nano_33_ble

  #673 opened 3 years ago by tomers
  2

• Calibration method in CorrectADCResponse.ino seems inadequate

  #671 opened 3 years ago by ArnieO
  0

• ATSAMD21 is pulling ports low when calling wire.onRequest()

  #670 opened 3 years ago by Rudgas
  0

• Play nice with TinyUSB

  #666 opened 4 years ago by Spegs21
  0

• USBDevice.connected() does not work

  #661 opened 4 years ago by pillilz
  0

• had major trouble using ArduinoCore-samd/libraries/I2S with Arduino Zero

  #658 opened 4 years ago by willmather
  0

• 1.8.12 changed name/space for TwoWire?

  #654 opened 4 years ago by ladyada
  6

• Regression in UART buffer size

  #650 opened 4 years ago by sandeepmistry
  0

• Cant connect to NPE CABLE device using ver 1.8.10

  #647 opened 4 years ago by BrianFrankPalmer
  0