xs-vm

eXtremely Simple Virtual Machine

The purpose of this project is to implement a simple virtual machine, capable of executing assembly code similar to ARM. I will keep it simple (so probably no operation modes, interrupt handling, etc) because I built it for educational purposes. Why Python? Development speed, as opposed to performance, is the key priority for this project so Python fits in perfectly.

Installing and running

Executing code

$ cat demos/function_call.s
mov r1, #1
mov r2, #3
bl func1
swi #0

func1    push lr
         add r0, r1, r2
         
$ python run.py demos/function_call.s
Instructions executed: 7
Instructions executed by type:
╒═══════════════╤═════════╤═══════════════╤═════════╕
│ Instruction   │   Count │ Instruction   │   Count │
╞═══════════════╪═════════╪═══════════════╪═════════╡
│ swi           │       1 │ bl            │       1 │
├───────────────┼─────────┼───────────────┼─────────┤
│ mov           │       2 │ pop           │       1 │
├───────────────┼─────────┼───────────────┼─────────┤
│ add           │       1 │ push          │       1 │
╘═══════════════╧═════════╧═══════════════╧═════════╛
Register bank after halting:
╒═════╤═══╤═════╤══════════╕
│ r0  │ 4 │ r1  │        1 │
├─────┼───┼─────┼──────────┤
│ r2  │ 3 │ r3  │        0 │
├─────┼───┼─────┼──────────┤
│ r4  │ 0 │ r5  │        0 │
├─────┼───┼─────┼──────────┤
│ r6  │ 0 │ r7  │        0 │
├─────┼───┼─────┼──────────┤
│ r8  │ 0 │ r9  │        0 │
├─────┼───┼─────┼──────────┤
│ r10 │ 0 │ r11 │        0 │
├─────┼───┼─────┼──────────┤
│ r12 │ 0 │ r13 │ 16777215 │
├─────┼───┼─────┼──────────┤
│ r14 │ 3 │ r15 │        4 │
╘═════╧═══╧═════╧══════════╛

Installing and running tests

Just clone this repository and install the dependencies (pip install -r requirements.txt).

You can run the tests simply by running nosetests from the project root directory.

Architecture

The VM has 16 registers (R0-R15). Most of the are general purpose, with a few special ones:

SP (R13). Stack pointer. Points to the last element pushed to the stack (or 0xFFFFFF if nothing has been pushed yet).
LR (R14). Link register. Holds a return address of the function call.
PC (R15). Program counter. Holds the address of the instruction in memory which will be executed next.

For function calls, the result is stored in R0, and R1-R3 are normally used to pass the parameters.

Supported instructions

Instruction	Example	Description
mov	mov r1, #5	Move some value (either other register or a constant) to the register.
	mov r1, r2
add	add r0, r1, #3	r0 = r1 + 3
sub	sub r0, r1, #3	r0 = r1 - 3
mul	mul r0, r1, #4	r0 = r1 * 4
mla	mla r0, r1, #3, #5	r0 = r1 * 3 + 5
cmp	cmp r0, r1	Compare 2 numerical values and store the difference in comparison register (comp_reg = r0 - r1). The value is used later for conditional branching.
b	b main	Always branch. Set PC to the instruction to which the given label is pointing to.
	b 0x001	Instead of label, memory location can be also passed.
beq	beq main	Branch if equal, the result of cmp instruction is used.
bne	bne main	Branch if not equal.
blt	blt foo	Branch if less than (comp_reg < 0).
bgt	bgt foo	Branch if greater than (comp_reg > 0).
bl	bl printf	Branch and link. Stores PC in LR, equivalent of a function call.
nop	nop	No OPeration. Do nothing.
push	push r0	Push the value of r0 to the stack.
pop	pop r1	Pop the element from the stack and store the value in r1.
swi	swi #0	Software interrupt. See below.

Software interrupts

In xs-vm, software interrupts is a method of communication between the application being executed and the virtual machine executing it.

The list of supported software interrupts:

Interrupt	Description
swi #0	Halt. Stop executing the application and quit

ariestiyansyah/xs-vm