Xiaomi Yi camera 1.5.6/1.5.12 firware bitrate codes are the same as 1.2.13
But resolution address codes are different. See the autoexec_*.ash file for full list of customized resolution bitrates.
| bitrate | address |
|---|---|
| 10 mbps | 0x4120 |
| 12 mbps | 0x4140 |
| 16 mbps | 0x4170 |
| 18 mbps | 0x4190 |
| 20 mbps | 0x41A0 |
| 25 mbps | 0x41C8 |
| 30 mbps | 0x41F0 |
| 35 mbps | 0x420C |
| 40 mbps | 0x4220 |
| 45 mbps | 0x4234 |
| 50 mbps | 0x4248 |
https://github.com/PJanisio/Xiaomi_Yi_autoexec/blob/master/bitrate/1.2.13/resolution_addresses.md https://github.com/PJanisio/Xiaomi_Yi_autoexec/blob/master/bitrate/1.2.13/bitrate_addresses.md
These files are provided "as is", use them at your own risk. Author is not responsible for any damage or loss, caused by information provided. Be carefull, watch out for different hardware revisions (Z2*/L/S etc.), read comments inside *.ash files.