/ssd1306_linux

SSD1306 oled I2C driver working in linux

Primary LanguageCMIT LicenseMIT

OLED SSD1306 Linux driver

This is plain c code using linux I2C device node (/dev/i2c-X X for 0,1,2,3...). Please make sure the linux has run "modprobe i2c-dev". 128x64 and 128x32 are supporting and using I2C interface ONLY

Files

linux_i2c.c source code for i2c control in linux device node. linux_i2c.h header file for i2c control in linux. ssd1306.c i2c protocol functions to control oled SSD1306. ssd1306.h header file for i2c protocol functions and defined commands in SSD1306. font.h font header file define 5x7 small font and 8x8 normal font. ascii value from 0x20(SPACE) to 0x7e(~). main.c main file to take params and control oled SSD1306. Makefile plain Makefile to build the source code. It works in raspberry pi. Readme.md this readme file.

How to compile

Require make and gcc. If you use cross compile, please self define $(CC). Type "make" to build binary "ssd1306_bin". Type "make clean" to clean the project.

How to use

  • always init oled module ONCE when power up.
  • set the device node address EVERYTIME if not using default value /dev/i2c-0
  • the init oled module always reset XY cursor to (0,0)
  • all params can set together
  • clear screen if new text need to write, otherwise wording overlapping happened
  • resolution value stored in /tmp/.ssd1306_oled_type with format like "128x64" or "128x32" or "64x48"
  • always do display rotation first and then filling text. otherwise the text cause mirror
  • make sure the XY cursor setting in correct location before printing text

Params

-I		init oled (128x32 or 128x64 or 64x48)
-c		clear (line number or all)
-d		0/display off 1/display on
-f      0/small font 5x7 1/normal font 8x8 (default small font)
-h		help message
-i		0/normal oled 1/invert oled
-l		put your line to display
-m		put your strings to oled
-n      I2C device node address (0,1,2..., default 0)
-r		0/normal 180/rotate
-x		x position
-y 		y position

Example

init the OLED once

  • resolution 128x64
$ ./ssd1306_bin -I 128x64
  • resolution 128x32
$ ./ssd1306_bin -I 128x32
  • resolution 64x48
$ ./ssd1306_bin -I 64x48

clear display

  • clear 1st line
./ssd1306_bin -c0
  • clear 2nd line
$ ./ssd1306_bin -c1
  • clear 4th line
$ ./ssd1306_bin -c3
  • clear whole screen
$ ./ssd1306_bin -c

display on/off

  • turn off display
$ ./ssd1306_bin -d 0
  • turn on display
$ ./ssd1306_bin -d 1

inverting display

  • normal oled (0 is off, 1 is on)
$ ./ssd1306_bin -i 0
  • invert oled (0 is on, 1 is off)
$ ./ssd1306_bin -i 1

print words

  • write line "Hello World"
$ ./ssd1306_bin -l "Hello World"
  • write message "alpha\nbravo\ncharlie\ndelta" (please place \n for next line)
$ ./ssd1306_bin -m "alpha\nbravo\ncharlie\ndelta"

I2C device address (default is /dev/i2c-0)

  • using /dev/i2c-1
$ ./ssd1306_bin -n 1

rotate display

  • normal orientation
$ ./ssd1306_bin -r 0
  • turn 180 orientation
$ ./ssd1306_bin -r 180

set cursor location

  • set XY cursor 8,1(x is column, 8 columns skipping, y is row, 2nd line)
$ ./ssd1306_bin -x 8 -y 1