aromring/MAX30102_by_RF

Issues

• Can't Print SPO2 on OLED

  #41 opened 4 months ago by AustinTetteh
  5

• Can't get past maxim_max30102_init(); on ESP32-C3

  #40 opened 4 months ago by moeburn
  1

• RED/IR sensor value looks strange

  #28 opened 3 years ago by integer-bin
  4

• Float buffer allocation uses unnecessary memory

  #36 opened 2 years ago by 0xMihir
  5

• Can't get SpO2 to work

  #13 opened 5 years ago by robcazzaro
  29

• Error while compiling

  #35 opened 2 years ago by sivaareddi
  3

• Calibration issue -> Potential issue with maxim_max30102_read_fifo

  #34 opened 2 years ago by elidonner
  3

• 30102 not working

  #33 opened 2 years ago by Akshayrajkr
  1

• Need to change 50 Sampling Frequency / 1 Sampling Time

  #32 opened 2 years ago by madhavanatmel
  6

• Max30102 is not powering up

  #31 opened 3 years ago by rishabh900
  0

• Unable to understand the meaning/derivation of the way of calculating the slope of baseline

  #30 opened 3 years ago by rishabh900
  1

• BUG and Improvement suggestions

  #29 opened 3 years ago by williamesp2015
  4

• HR always -999 or invalid while wearing sensor on wrist.

  #26 opened 4 years ago by AAJAY5
  11

• if (!sensor.begin())

  #27 opened 3 years ago by gallaugher
  1

• Sensor not turning on

  #1 opened 6 years ago by RimonB95
  4

• I cant found more detail sensor settings, problems with get values

  #25 opened 4 years ago by sjsivo
  6

• min_autocorrelation_ratio = 0.5???

  #24 opened 4 years ago by GOKUandVEGET
  1

• Accurate HR and inaccurate spo2 with inaccurate low spo2 test sample

  #23 opened 4 years ago by MirzaSamnani
  4

• MAX30102 FIFO returns IR data first (i.e. LED1 = IR & LED2 = Red)

  #22 opened 4 years ago by theophyk
  2

• new code bug

  #21 opened 4 years ago by GOKUandVEGET
  3

• using esp8266-12e

  #20 opened 4 years ago by alinelena
  3

• Heart Rate Stuck at 93

  #17 opened 4 years ago by caferrick
  1

• New code bug

  #18 opened 4 years ago by GOKUandVEGET
  3

• File names and case sensitivity

  #19 opened 4 years ago by mgaman
  1

• The question about Relative autocorrelation

  #16 opened 4 years ago by GOKUandVEGET
  1

• some abnormal data

  #14 opened 5 years ago by GOKUandVEGET
  8

• High heart rates reported incorrectly

  #6 opened 4 years ago by Mr-99
  11

• nrf52832&Max30102

  #10 opened 5 years ago by Lashca-Rombot
  15

• How to solve the error of high heart rate. And the actual error is 2 times or 3 times, thank you

  #11 opened 5 years ago by GOKUandVEGET
  21

• Share reference raw data from MAX30102 module

  #12 opened 5 years ago by aziubin
  1

• Heart-rate is always the same (83 Bpm)

  #8 opened 5 years ago by asemchenko
  25

• Wrong Readings

  #9 opened 5 years ago by jointothedarkside
  2

• Cool. Can I link two MAX30102 sensor by this code?

  #7 opened 5 years ago by timeanddoctor
  2

• Not work with higher sampling frequency

  #2 opened 6 years ago by dzungpv
  14

• Are we confident enough in the data coming from the board?

  #5 opened 5 years ago by kwende
  3

• IR and Red signals do not show any heart rate info

  #4 opened 6 years ago by doug-burrell
  6

• Unable to print SPO2 and HR via serial connection

  #3 opened 6 years ago by jaredwong92
  8