DMX Controller / Light Mixer made in MAXMSPJITTER. Author: Guilherme Martins, ARTICACC http://artica.cc
Source code available at: http://github.com/artica/maxmsp_dmx_control
Hardware used:ENTTEC DMXUSBPRO. DMX interface Max object: dmxusbpro
INSTRUCTIONS:
Connect the ENTTEC DMXUSBPRO.
Run ARTICA_DMX_CONTROL.maxpat
Wait until 2 Windows fully open, might take a couple of seconds or even minutes, depending on your CPU power.
Window 1: ARTICA_DMX_CONTROL | Submasters and Cues Window 2: DMX_CHANNEL_PAGE | Channels and ENTTEC detector
Click OPENXML button and select the "DMX_LIGHT_PATCH.xml" file
Move sliders and look and the 2nd window and see if the DMX channels change accordingly
ENTTEC:
Tap the "menu" button on the window 2, and select the serial port
XML:
TapTools XML external is used to parse xml file. This XML file is your light patch. Each <sub_#> defines the DMX channels and values assigned to the Submaster #.
CUES:
This cue system is very basic and will be updated asap. Basically you can define an IN and OUT time ramp for each Submaster and record it on a .JSON file. Altouth the file is automatically readed, you can always use the red and blue button to record and read the LIGHT_CUELIST.JSON file. Use the PREV and NEXT button to walk through the cues.