aruttkamp/ioBroker.rct

Issues

• Feature request: Write soc_target value

  #20 opened a year ago by philoxio
  17

• Please consider fixing issues detected by repository checker

  #158 opened 3 months ago by ioBroker-Bot
  1

• Please consider fixing issues detected by repository checker

  #160 opened 3 months ago by ioBroker-Bot
  0

• Update stable version in repo from 1.2.9 to 1.2.13

  #157 opened 3 months ago by GermanBluefox
  1

• regelmäßige Verbindungsfehler

  #148 opened 3 months ago by plm2310
  6

• RCT: connect error, please check IP adress and network

  #136 opened 4 months ago by Corneys
  30

• android_description lässt Adapter abstürzen

  #53 opened 4 months ago by aruttkamp
  4

• rct has an invalid jsonConfig

  #135 opened 4 months ago by jomahol
  1

• Update stable version in repo from 1.2.7 to 1.2.9

  #134 opened 4 months ago by GermanBluefox
  1

• Werte werden nicht aktualisiert g_sync.p_ac_sum_lp g_sync.u_l_rms[2] WR v2.3.5676

  #126 opened 5 months ago by OnkelFD
  4

• RCT Adapter auf 100% CPU auslastung

  #124 opened 5 months ago by OnkelFD
  7

• battery.cycles wird mit 0 angezeigt

  #31 opened 5 months ago by BenS89
  43

• Verbindung zu Wechselrichter bricht ab

  #46 opened 6 months ago by Corneys
  13

• register prim_sm.state not included anymore

  #63 opened 6 months ago by FreakyJ
  8

• Datatype info

  #106 opened 6 months ago by Mutzeli
  31

• [BUG] loosing of

  #114 opened 6 months ago by mosandlt
  54

• [BUG] Adapter crashes if host unreachable

  #108 opened 6 months ago by mcm1957
  2

• [BUG] Read-only state "rct.0.info.connection" has been written without ack-flag with value "false"

  #107 opened 6 months ago by mcm1957
  2

• Adapter Aktualisiert nur ein paar mal und macht dann nichts mehr

  #115 opened 6 months ago by Crawler1337
  1

• Warnung im Protokoll

  #89 opened 7 months ago by jomahol
  8

• Abfrageintervall wird nicht korrekt eingehalten

  #93 opened 7 months ago by BenS89
  9

• Update stable version in repo from 1.2.2 to 1.2.4

  #94 opened 8 months ago by GermanBluefox
  1

• Adapter Absturz bei Anlagen Abschaltung

  #90 opened 8 months ago by jomahol
  5

• reopening - register prim_sm.state not included anymore #63

  #88 opened 8 months ago by timoglaess
  1

• Min SOC Zielwert 2 stellig nach Komma

  #87 opened 8 months ago by jomahol
  5

• Adapter stürzt ab

  #75 opened 9 months ago by Floatcher
  3

• Objektbaum "energy" wird nicht aktualisiert bzw. nicht angelegt

  #56 opened a year ago by petermeter2000
  13

• Fragen zu Adapter

  #45 opened a year ago by aruttkamp
  3

• g_sync.p_ac_sum_lp aktualisiert nicht sauber

  #54 opened a year ago by BenS89
  21

• "Warn" "Invalid RCT Name" bei Adapterstart

  #55 opened a year ago by Madaraxa
  8

• Hausverbrauch nicht auszuwerten ..

  #23 opened a year ago by jonaslinhose
  8

• rct_refresh

  #34 opened a year ago by wiese-computer-brb
  12

• rct.0.power_mng.bat_next_calib_date als Datum anzeigen??

  #18 opened a year ago by timoglaess
  18

• rct.0.info.connection / Fehler mit Terminierung des Adapters

  #30 opened a year ago by OnkelFD
  45

• Consider fixing issues reported by adapter checker

  #35 opened a year ago by mcm1957
  1

• Consider using dependabot

  #37 opened a year ago by mcm1957
  1

• Adapter stürzt nach Update auf V1.1.7 wiederholt ab

  #33 opened a year ago by NCIceWolf
  6

• V1.1.6 Problem

  #32 opened a year ago by wiese-computer-brb
  2

• Status Batterie

  #28 opened a year ago by OnkelFD
  2

• Falscher Werte-Typ zwischen Wechselrichter und Adapter?

  #16 opened a year ago by NCIceWolf
  10

• battery.soc Einheit verschoben

  #29 opened a year ago by OnkelFD
  7

• Adapter startet neu

  #13 opened a year ago by SpitfireXP
  8

• Load phase 1/2/3, solar generator A/B voltage

  #12 opened a year ago by lauff
  1

• Nach Update auf 1.0.3 wird Version weiterhin 1.0.1 gezeigt?

  #17 opened a year ago by Madaraxa
  2

• Update stable version in repo from 0.0.0 to 1.0.3

  #24 opened a year ago by GermanBluefox
  1

• Update stable version in repo from 0.0.0 to 1.0.3

  #22 opened a year ago by GermanBluefox
  1

• Update stable version in repo from 0.0.0 to 1.0.3

  #21 opened a year ago by mcm1957
  0

• NOTE: PROJECT NO LONGER MAINTAINED

  #14 opened 2 years ago by lauff
  14

• Frage: Gibt es eine API? Oder woher kommen die Werte :)

  #15 opened 2 years ago by Madaraxa
  2

• Abbruch der Instanz - Host nicht erreichbar

  #11 opened 2 years ago by aruttkamp
  1