aschuma/max7219-led-matrix-clock-mqtt-display

Visualizes MQTT events on a Max7219 led matrix / raspberry pi (https://youtu.be/OGFmESPtSfg)

Visualizes MQTT events on an 8 x MAX7219 8x8 led matrix / raspberry pi w

Here is what you get when you deploy the application on a PI / MAX7219 led matrix, please click on the image to see more.

Some hints for setting up the software and the hardware

• This project uses the luma led matrix driver coded by Richard Hull https://github.com/rm-hull/luma.led_matrix/blob/master/README.rst (Credits to Richard for his excellent work).
• For LED matrix setup/wiring, please consult https://luma-led-matrix.readthedocs.io/en/latest/install.html#pre-requisites, especially the section GPIO pin-outs MAX7219 Devices (SPI)
• As Richard Hull mentiones in https://luma-led-matrix.readthedocs.io/en/latest/notes.html, you should consider to use a logic level converter to bridge the 3.3V (PI) <-> 5V (MAX7219) gap. I'am using https://www.amazon.com/Level-Conversion-Module-Sensor-Raspberry/dp/B07QC929R4/ref=sr_1_16?dchild=1&keywords=5V+3.3V+8-Kanal+Logic+Level+Converter+f%C3%BCr+Arduino+Raspberry+Pi&qid=1609707511&sr=8-16, but other bidirectional converter should work fine too.
• Checkout source code git clone https://github.com/aschuma/max7219-led-matrix-clock-mqtt-display.git
• Create a python 3 virtual environment
• Install 3rd party libraries defined in requirements.txt
• Copy config.py.template to config.py and adjust the settings
• Run the __init__.py script in the base directory
• Submit MQTT events using display/ as base path. The payload of the events should be like

   {
       name : <label-string-for-the-value>,
       description: <string-describing-the-value--currently-unused>,
       weight : <integer-used-for-sorting-the-values>,
       value : <the-value-to-display-as-string>,
       unit : <unit-of-the-value-to-display-as-string>,
       timestamp: <iso-timestamp-as-string--only-for-debugging-purpose>
   }