ashishkumarpardeshi

ashishkumarpardeshi

ashishworkbench.github.io

Beginner_Electronics_Fun_Series

BioAmp-EXG-Pill

BioAmp EXG Pill is a small and elegant Analog Front End (AFE) board for BioPotential signal acquisition.

demo

DIY_Oxygen_Analyzer

This repository is for Design and Development of DIY Oxygen Analyzer Prototyping Board, Writing Code and Calibration.

Instruino

Instruino is (one of the DIY Lab Instruments) a common platform for multiple sensors. It provide measurements regarding pH, Turbidity, Temperature of liquid, Humidity, ambient Temperature and Light Intensity. Basically it is an IOT device capable of sending data to internet via WiFi and also contains bluetooth and SD Card logging facility. The complete set is done o half size drawing board with casing and other 3D printed part.

IoT_IR_Thermometer_v1

IoT IR Thermometer is a DIY device developed to measure body temperature of humans and surface temperature of an object. It is an IoT-enabled device which can also publish data over internet to help in generating Heat Map and data for research in situation like COVID-19. This device is ESP-12E powered and houses MLX90614 IR Thermometer sensor. The main objective of this DIY is to explore the science and technology behind the Contact-less Thermometers and also enable other to develop their own IR Thermometer.

STM32f10xx_Exploration

Lets explore STM32 and its Driver/Firmware development from scratch.

ashishkumarpardeshi/DIY_Oxygen_Analyzer

This repository is for Design and Development of DIY Oxygen Analyzer Prototyping Board, Writing Code and Calibration.

ashishkumarpardeshi/Instruino

Instruino is (one of the DIY Lab Instruments) a common platform for multiple sensors. It provide measurements regarding pH, Turbidity, Temperature of liquid, Humidity, ambient Temperature and Light Intensity. Basically it is an IOT device capable of sending data to internet via WiFi and also contains bluetooth and SD Card logging facility. The complete set is done o half size drawing board with casing and other 3D printed part.

ashishkumarpardeshi/IoT_IR_Thermometer_v1

IoT IR Thermometer is a DIY device developed to measure body temperature of humans and surface temperature of an object. It is an IoT-enabled device which can also publish data over internet to help in generating Heat Map and data for research in situation like COVID-19. This device is ESP-12E powered and houses MLX90614 IR Thermometer sensor. The main objective of this DIY is to explore the science and technology behind the Contact-less Thermometers and also enable other to develop their own IR Thermometer.

ashishkumarpardeshi/ashishkumarpardeshi

ashishkumarpardeshi/ashishworkbench.github.io

ashishkumarpardeshi/Beginner_Electronics_Fun_Series

ashishkumarpardeshi/BioAmp-EXG-Pill

BioAmp EXG Pill is a small and elegant Analog Front End (AFE) board for BioPotential signal acquisition.

ashishkumarpardeshi/demo

ashishkumarpardeshi/STM32f10xx_Exploration

Lets explore STM32 and its Driver/Firmware development from scratch.

ashishkumarpardeshi/DIY-Sepctrophotometer-V1

A DIY Spectrophotometer is a device to measure the transmission and absorbance of light through various samples.

ashishkumarpardeshi/Embedded_linux_Exploration

This repo deals with the learning and exploration of the Embedded Linux Journey using BeagleBone Black.

ashishkumarpardeshi/IoT_ESP32_Deployment_Board

ashishkumarpardeshi/jekyll

:globe_with_meridians: Jekyll is a blog-aware static site generator in Ruby

ashishkumarpardeshi/Oxikit_Brain_Wiring_Simplified

ashishkumarpardeshi/portfoliotest

ashishkumarpardeshi/Quectel_MC60_OpenCPU

Quectel MC60 OpenCPU Example

ashishkumarpardeshi/ServerRoom-Monitoring-and-Alert-Device

ashishkumarpardeshi/SparkFun-KiCad-Libraries

SparkFun's KiCad Libraries

ashishkumarpardeshi/Speedo-Odo-Meter

ashishkumarpardeshi/sra-board-hardware-design

ESP32-based Development Board for Robotics and Embedded Applications

ashishkumarpardeshi/Weather_Station_HBCSE