Homebridge MyQ Liftmaster and Chamberlain

MyQ (Liftmaster and Chamberlain) garage and MyQ devices plugin for Homebridge.

Homebridge MyQ2

MyQ LiftMaster and Chamberlain Plugin for Homebridge

homebridge-myq2 is a HomeBridge plugin to interact with MyQ smart garage door openers, made primarily by LiftMaster and Chamberlain.

There are two ways to be able to control a MyQ-compatible garage door opener through HomeKit:

Liftmaster and Chamberlain make a hardware HomeKit bridge also called Home Bridge (not to be confused with the open source Homebridge project). Unfortunately, some of us have encountered issues with the hardware bridge in a real world setting, where it either stops working or hangs for extended periods of time. Others have encountered no issues and this solution works well.
A plugin for homebridge like this one that emulates the capabilities of a MyQ bridge.

Either solution will provide a complete solution to automating your garage door and you'll soon be automating your home with HomeKit like you always dreamed of. :)

What makes this plugin different than the other plugins out there for MyQ support?

Both homebridge-liftmaster2 and homebridge-chamberlain exist as good options, if you prefer. This plugin is based on homebridge-liftmaster2 with additional bugfixes and contributions by others. The intent is to keep this plugin up-to-date and incorporate additional capabilities as-needed without overly bloating it.

In a nutshell, the aim of this plugin for things to "just work". Without complex configuration options needed for the functionality you would expect from a first-party HomeKit plugin. But of course, those granular options are available as well for the adventurous or those with more esoteric use cases. What does "just work" mean? It means that this plugin will poll at regular, reasonable intervals for changes in state of a garage door opener or other MyQ device and inform HomeKit of those changes. By default. Without additional configuration beyond the login information required for MyQ services.

Installation

If you are new to Homebridge, please first read the Homebridge documentation.

Install homebridge:

sudo npm install -g --unsafe-perm homebridge

Install homebridge-myq2:

sudo npm install -g homebridge-myq2

Changelog

Changelog starting with v2.0 is available here.

What's new in 2.0

This plugin has been completely rewritten and updated to work with the modern homebridge APIs. As a result, some prior functionality is currently unavailable. Features that are not currently supported (but will be in a future update):

Gateways and openers can be selectively filtered. The configuration options are there, but will be silently ignored.
Battery support is not included. If someone has need for this functionality, create an issue and I can work with you to identify what's needed to expose this as I don't have access to devices with a battery status.

Things to be aware of

The myQ API gets regularly updated and unfortunately this results in regularly breaking this and other myQ-related plugins. I've refactored this plugin in part to make it easier to maintain with future breaking changes that may come.
By default, this plugin is set to silently fail if it can't login to the myQ API, but continue to retry at regular polling intervals.
The configuration block for config.json has changed to rename the platform (and it is case sensitive as well). This is a breaking change and you will need to update your config.json to reflect the updates.

What's new in 1.1

I've simplified some configuration options and adjusted some of the logging. There are also configuration file changes in this version - in particular, polling is no longer an optional parameter. Given the intent of this plugin is to inform you of state changes in your garage door opener (and other MyQ accessories), polling is an essential component particularly when you have automations in place. The default polling interval is 15 seconds which should be sufficient for most purposes but is configurable below.

Additionally, I've increased the polling duration for the shortPoll interval to give you more time between opening and closing the garage door to allow for more granular state changes.

Eventually, I hope we can reverse engineer the service / push protocol that MyQ uses, but for the time being, polling it is.

Configuration

Add the platform in config.json in your home directory inside .homebridge.

"platforms": [{
    "platform": "myQ",
    "email": "email@email.com",
    "password": "password"
}]

Advanced Configuration (Optional)

This step is not required. The defaults should work well for almost everyone.

"platforms": [{
    "platform": "myQ",
    "name": "MyQ",
    "email": "email@email.com",
    "password": "password",
    "verbose": false,
    "openDuration": 15,
    "closeDuration": 25,
    "longPoll": 15,
    "shortPoll": 5,
    "shortPollDuration": 600,
    "gateways": ["My Home"],
    "openers": ["openerid1"]
}]

Fields	Description	Default	Required
platform	Must always be `myQ`.		Yes
name	For logging purposes.		No
email	Your MyQ account email.		Yes
password	Your MyQ account password.		Yes
verbose	Logging verbosity for debugging purporses.	false	No
openDuration	Time in `s` to open garage door completely.	15	No
closeDuration	Time in `s` to close garage door completely.	25	No
longPoll	Normal polling interval in `s`.	15	No
shortPoll	Polling interval in `s` when door state changes.	5	No
shortPollDuration	Duration in `s` to use `shortPoll`.	600	No
gateways	Array of gateway IDs or names to add.	[]	No
openers	Array of openers IDs to make available.	[]	No

askovi/homebridge-myq2